Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of full extinction flat

[Chemical Knowledge]：Specification for storage and transport of full extinction flat

Read： 815 Time：20months ago Source：Transform the World with Simplicity

Full extinction flat chemical production of raw materials for safe storage and transportation specifications

1. Introduction

With the rapid development of the chemical industry, full extinction flat as an important chemical production of raw materials, in various fields have been widely used. However, due to its special physical and chemical properties, full extinction flat has certain safety risks during storage and transportation. In order to ensure production safety and improve production efficiency, it is very important to formulate a set of strict safety storage and transportation specifications.

2. the physical and chemical properties of full extinction flat

full extinction flat belongs to a polymer compound, has good thermal stability and chemical stability, is not easy to burn, but may decompose or react under certain conditions. In addition, full extinction flat has certain toxicity and irritation, and may cause harm to human body and environment.

3. safety storage specification

1. storage site requirements: full extinction flat should be stored in a dry, cool, well-ventilated special warehouse, away from fire, heat and direct sunlight. The warehouse floor should be flat, non-slip, and equipped with fire protection, lightning protection and other safety facilities.
2. Storage container requirements: full extinction flat should be stored in a special container, the container should have good sealing performance, corrosion resistance, compression and other characteristics. During storage, the container and its tightness should be checked regularly to ensure that there is no leakage.
3. Storage limit requirements: according to the warehouse area, ventilation conditions and other factors, a reasonable set of full extinction flat storage limit to ensure storage safety.
4. Storage identification requirements: Set up obvious safety identification in the warehouse, including dangerous goods identification, storage limit identification, etc., so that management personnel and operators can identify.

4. safety transport specification

1. transport vehicle requirements: full extinction flat should be used with dangerous goods transport qualified vehicles for transport, vehicles should be equipped with fire, explosion, leakage and other safety facilities.
2. Requirements for transportation personnel: The operators who transport full extinction and flat shall have relevant qualifications and experience and be familiar with the safe operation procedures for the transportation of dangerous goods.
3. Transportation packaging requirements: special packaging should be used in the process of transportation, and the packaging should be firm and sealed to prevent leakage or damage during transportation.
4. Requirements for transportation routes: Choose reasonable transportation routes and avoid passing through sensitive areas such as densely populated areas and water source protection areas as far as possible.
5. Transportation identification requirements: obvious dangerous goods identification shall be set on the transportation vehicle, indicating the name of full extinction flat, hazard level and other information.

5. emergency treatment measures

1. Leakage treatment: if it is found that the full extinction flat leakage occurs, immediate measures should be taken to prevent the leakage from spreading, and the leakage should be handled safely.
2. Fire treatment: In case of fire, fire extinguishers, fire extinguishers and other fire fighting equipment shall be used immediately to extinguish the fire and report to the police in time.
3. Poisoning treatment: if any person is poisoned, the poisoned person should be moved to a well-ventilated place immediately, and necessary first aid and medical treatment measures should be taken.

6. Training and Management

1. Conduct regular safety training for staff engaged in full extinction flat storage and transportation to improve their safety awareness and operational skills.
2. Establish and improve the storage and transportation management system of full extinction and flat, clarify the safety operation procedures and responsibility system, and ensure the effective implementation of various safety measures.

In short, the safety storage and transportation specifications of full extinction flat in the field of chemical production raw materials are of great significance to ensure production safety and improve production efficiency. Through strict implementation of specifications, safety risks can be reduced to ensure that the storage and transportation process of the full extinction flat is safe and controllable.

Previous： Specification for storage and transport of total extinction

Next： Specification for storage and transport of ultra-matt

News Categories