Current Location： Home > News > Chemical Knowledge > Ethylene Tar-Specification for Storage and Transportation of Start-up Materials

[Chemical Knowledge]：Ethylene Tar-Specification for Storage and Transportation of Start-up Materials

Read： 958 Time：20months ago Source：Transform the World with Simplicity

Ethylene tar-drive material safety storage and transportation specification

1. Introduction

Ethylene tar-drive material is an important raw material for chemical production, widely used in petrochemical, energy and other fields. However, due to its special physical and chemical properties, ethylene tar-starting materials have certain safety risks during storage and transportation. In order to ensure production safety and improve production efficiency, it is very important to develop a set of scientific and reasonable storage and transportation specifications for ethylene tar-start-up materials.

2. the physical and chemical properties of ethylene tar -

ethylene tar-starting material is a black viscous liquid, the main component is hydrocarbons, with high viscosity, density and flash point. At the same time, it also contains a small amount of sulfur, nitrogen and other impurity elements, with a certain degree of corrosion and toxicity.

3. Ethylene Tar-Start-up Material Hazard Analysis

Ethylene Tar-Start-up Material in the storage and transportation process may encounter the main safety risks include: fire, explosion, leakage, poisoning and so on. The occurrence of these risks may be related to the following factors: imperfect storage and transportation facilities, irregular operation, environmental factors, etc.

4. Ethylene Tar-Start-up Material Storage Specification

In order to ensure the safe storage of ethylene tar-start-up material, the following specifications should be observed:

1. Storage facilities should meet the safety requirements of fire prevention, explosion prevention and lightning protection, and be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
2. The storage area should be set up with obvious safety warning signs, no fireworks, and keep well ventilated.
3. In the process of storage, the integrity of storage facilities should be checked regularly, and abnormal situations such as leakage should be dealt with in time.
4. Operators should be professionally trained and familiar with the physical and chemical properties and safe operation procedures of ethylene tar-starting materials.

5. Ethylene Tar-Start-up Material Transportation Specifications

In order to ensure the safe transportation of ethylene tar-start-up materials, the following specifications should be observed:

1. Transportation vehicles should comply with relevant safety standards and be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
2. During transportation, it should keep running smoothly, avoid severe vibration and collision, and prevent package damage and leakage.
3. Relevant road traffic rules shall be observed during transportation to ensure driving safety.
4. Transportation personnel shall be professionally trained and be familiar with the physical and chemical properties of ethylene tar-starting materials and safe transportation operation procedures.

6. emergency treatment measures

In case of leakage, fire and other safety accidents during the storage and transportation of ethylene tar-start-up materials, the following emergency treatment measures shall be taken:

1. Immediately start the emergency plan and organize personnel to rescue and evacuate.
2. Use special equipment to recycle the leakage to avoid environmental pollution.
3. Use dry powder, foam and other fire fighting equipment for fire fighting, and pay attention to prevent re-ignition and secondary accidents.
4. Treat the injured in time and send them to the hospital for further treatment.

7. conclusion

ethylene tar-starting material as an important raw material for chemical production, there are certain safety risks in the process of storage and transportation. In order to ensure production safety and improve production efficiency, a set of scientific and reasonable storage and transportation specifications must be formulated and strictly implemented. At the same time, strengthening the professional training and safety awareness education of operators and improving the ability to respond to emergencies are also important measures to ensure the safe storage and transportation of ethylene tar-driving materials.

Previous： Specification for storage and transport of polypropylene-KCL

Next： Styrene-Specification for storage and transport of start-up materials

News Categories