Read: 453
Time:13months ago
Source:Transform the World with Simplicity
Antistatic agents in the field of chemical production of raw materials in the safety of storage and transportation specifications
1. Introduction
antistatic agents as an important raw material in the production of chemicals, widely used in plastics, rubber, coatings and other fields. However, due to its special physical and chemical properties, there are certain safety risks in the storage and transportation of antistatic agents. In order to ensure the safe use of antistatic agents, this paper discusses the safe storage and transportation specifications of antistatic agents in detail. Classification and properties of
2. antistatic agents
antistatic agents are mainly divided into surfactants, polymers and inorganic salts. These compounds usually have a certain polarity, which can reduce the resistance of the material surface, thereby eliminating static electricity. However, antistatic agents also have some dangerous properties, such as flammability, toxicity, irritation, etc., so special attention should be paid during storage and transportation.
3. storage specifications for antistatic agents
1. Storage environment: The antistatic agent should be stored in a dry, cool, well-ventilated place, avoiding direct sunlight and high temperature.
2. Storage container: A container with good sealing performance should be selected to prevent volatilization and leakage of antistatic agents.
3. Storage identification: Obvious safety identification shall be set in the storage area, including warning signs such as flammable, toxic and irritant.
4. Inventory management: strict registration of antistatic agents in and out of storage to ensure accurate inventory quantity and prevent misuse and waste.
4. antistatic agent transport specification
1. transport vehicles: should be used with dangerous goods transport qualified vehicles for transport, to ensure that the vehicle in good condition, meet the safety requirements.
2. Transport packaging: The packaging of antistatic agents should comply with relevant regulations and have sufficient strength to prevent damage and leakage during transportation.
3. Transport routes: Safe transport routes should be chosen to avoid passing through densely populated areas and sensitive areas.
4. Transport personnel: Transport personnel should be professionally trained to understand the nature of antistatic agents and safe operation procedures.
5. antistatic agent safe use specification
1. before use of antistatic agent safety assessment, understand its specific physical and chemical properties and safety risks.
2. During use, the operating procedures should be strictly observed, protective equipment should be worn, and direct contact with antistatic agents should be avoided.
3. Clean the used equipment and tools in time to prevent the residue from causing harm to the environment and personnel.
4. Properly dispose of the waste generated to avoid environmental pollution.
6. emergency plan and treatment measures
1. In the process of storage and transportation, emergency plan should be formulated to clarify the process and responsible person to deal with emergencies.
2. Provide emergency training to staff to ensure that measures can be taken quickly in the event of an accident.
3. The storage and transportation area shall be equipped with corresponding emergency equipment and equipment, such as fire extinguisher, sand, leakage emergency treatment, etc.
4. Record and analyze the accidents, sum up the experience and lessons, and constantly improve the safety management system.
7. conclusion
antistatic agents play an important role in the field of chemical production raw materials, but their safety storage and transportation standards must be paid attention. By strictly complying with storage and transportation specifications and strengthening safety management and training, safety risks can be reduced and production safety can be guaranteed. At the same time, the safe use and standard treatment of antistatic agents should also be paid enough attention to ensure that they play a role without causing harm to the environment and personnel.