Read: 485
Time:12months ago
Source:Transform the World with Simplicity
Polyethylene wax in the field of chemical production of raw materials in the safety of storage and transport specifications
1. Introduction
Polyethylene wax as an important chemical production of raw materials, widely used in plastic processing, coatings, inks and other fields. In order to ensure the safety of polyethylene wax during production, storage and transportation, this article will introduce its relevant safety regulations and operating requirements in detail.
2. the properties and hazards of polyethylene wax
polyethylene wax is a polymer compound with good heat resistance, chemical resistance and electrical insulation. However, in the presence of high temperature, open flame or oxidant, polyethylene wax may burn and produce toxic and harmful gases. In addition, polyethylene wax may produce dust during processing, which is harmful to human health and the environment.
3. polyethylene wax safety storage specifications
1. The storage place should choose a dry, ventilated and cool place, away from open flames, heat sources and oxidants.
2. The storage container should be well sealed to prevent dust and debris from entering, and avoid direct sunlight.
3. The storage area shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
4. Check the storage container regularly to ensure that it is intact.
4. polyethylene wax safety transportation specifications
1. Before transportation, check whether the packaging is intact, and replace it in time if it is damaged.
2. During transportation, the stability of the goods should be ensured to prevent sliding and dumping.
3. The transport vehicles shall be equipped with fire prevention, explosion-proof, anti-static and other safety facilities.
4. During transportation, avoid high temperature, open flame and oxidant, and prevent direct sunlight.
5. Transport personnel shall be professionally trained to understand the nature and hazards of polyethylene wax and master emergency treatment measures.
5. emergency treatment measures
1. In case of leakage, immediately cut off the fire source, absorb the leakage with sand or other non-combustible materials, and then collect it into a closed container.
2. In case of fire, immediately cut off the fire source, put out the fire with fire extinguisher, sand, etc., and call the police for help at the same time.
3. If personnel contact with polyethylene wax causes discomfort, they should immediately disengage from contact, transfer the patient to a ventilated place, keep the respiratory tract unobstructed, and seek medical treatment in time.
6. conclusion
polyethylene wax as a raw material for chemical production, it is necessary to strictly abide by relevant safety regulations during storage and transportation to ensure the safety of personnel and environment. By understanding the nature and hazards of polyethylene wax and taking proper storage and transportation measures, risks can be reduced and production safety can be guaranteed.