Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of rigid foam polyether polyols as amine starter

[Chemical Knowledge]：Specification for storage and transport of rigid foam polyether polyols as amine starter

Read： 417 Time：14months ago Source：Transform the World with Simplicity

Amine initiator rigid foam polyether polyol has important application value in the field of chemical production raw materials, but its safety and storage and transportation regulations are very important to ensure production safety and personnel health. This article will elaborate the safety, storage and transportation specifications of the amine starter hard foam polyether polyol to ensure safety and control during production, storage and transportation.

1. safety
of rigid foam polyether polyol
amine starter rigid foam polyether polyol as a chemical raw material, has certain toxicity and danger. In contact with the substance, should take the necessary safety precautions, such as wearing protective gloves, goggles and protective masks. In addition, prolonged or large exposure to the substance should be avoided to avoid allergic or toxic reactions.
In the production process of
, the quality of the amine initiator hard foam polyether polyol should be strictly controlled to ensure that the product purity is qualified and avoid mixing impurities. At the same time, the production equipment should be inspected and maintained regularly to ensure the normal operation of the equipment and prevent safety accidents caused by equipment failure.

2. the storage specification of amine initiator rigid bubble polyether polyol

1. storage facilities: amine initiator rigid bubble polyether polyol should be stored in a cool, dry, well-ventilated special warehouse. The warehouse shall be far away from fire and heat sources, and equipped with fire fighting equipment and leakage emergency treatment equipment.
2. Storage container: The container for storing amine initiator hard foam polyether polyol should be made of materials with good sealing performance and corrosion resistance, and ensure that the container is intact to prevent leakage.
3. Storage limit: According to production requirements and warehouse conditions, the storage limit of amine initiator hard bubble polyether polyol should be reasonably controlled to avoid safety hazards caused by excessive storage.
4. Storage identification: obvious safety identification and warning signs shall be set up in the warehouse to indicate the name, danger and emergency treatment measures of the stored materials.

3. amine initiator hard foam polyether polyol transport specification

1. transport vehicles: should be selected to meet the requirements of special transport vehicles, to ensure that the vehicle has good sealing performance and anti-collision ability, and equipped with the corresponding fire fighting equipment and leakage emergency treatment equipment.
2. Transport personnel: Transport personnel should be professionally trained and familiar with the transport requirements and emergency treatment measures of amine initiator rigid foam polyether polyol to ensure safety during transport.
3. Transport packaging: The amine initiator rigid foam polyether polyol should be packaged with packaging materials that meet the requirements to ensure that the packaging is tight and firm to prevent leakage or damage during transportation.
4. Transportation route: A reasonable transportation route should be selected to avoid passing through sensitive areas such as densely populated areas and water source protection areas as far as possible to reduce safety risks during transportation.

4. emergency treatment measures

in the storage and transportation process, such as amine initiator hard bubble polyether polyol leakage and other safety accidents, should take the following emergency treatment measures:

1. Immediately start the emergency plan, organize professionals to deal with, to prevent the accident from expanding.
2. Cut off the fire source and power supply in the accident area, and use special equipment to recover the leakage.
3. Use sand, activated carbon and other materials to absorb and clean the leakage area to avoid the spread of pollutants.
4. Monitor and repair the contaminated environment to ensure that the normal state is restored.

In conclusion, amine starter rigid foam polyether polyols have important application value in the field of production raw materials, but their safety and storage and transportation regulations must be strictly observed. By taking reasonable safety measures and standardized storage and transportation management, it can ensure the safety and controllability of amine initiator rigid foam polyether polyol in the process of production, storage and transportation, and ensure production safety and personnel health.

Previous： Specification for storage and transport of TEP

Next： Specification for Storage and Transportation of Propylene Glycol Ethers

News Categories