[Chemical Knowledge]：Specification for storage and transport of diethanol monoisopropanolamine

Diethanol monoisopropanolamine (DEIPA) is a common chemical raw material, widely used in lubricants, cleaning agents, preservatives and other fields. However, due to its toxicity and corrosiveness, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety.

This article will introduce in detail the safety storage and transportation specifications of diethanol monoisopropanolamine to ensure safety during production and use.

1. safety storage specification

1. Storage facility requirements
DEIPA should be stored in a dry, cool, well-ventilated special warehouse, avoid direct sunlight and high temperature environment. The warehouse floor should be flat, non-slip, and with anti-leakage measures. At the same time, should be equipped with fire fighting facilities, and ensure that the environment around the warehouse is clean and free of sundries.

2. Storage container requirements
DEIPA should be stored in a special container, which should have the characteristics of corrosion resistance and good sealing performance. During storage, the container and its tightness should be checked regularly to ensure that no leakage occurs.

3. Storage Limit Requirements
According to relevant regulations, the storage capacity of DEIPA should be controlled within a certain range to avoid safety risks caused by excessive storage. At the same time, a strict inventory management system should be established to ensure that the inventory is within the prescribed range.

4. Safety identification requirements
should set up obvious safety identification in storage facilities, containers and inventory areas, including dangerous goods identification, warning identification, etc., to remind personnel to pay attention to safety.

2. Safety Transport Specification

1. Transport Vehicle Requirements
DEIPA shall be transported by special transport vehicles, which shall have the characteristics of corrosion resistance and good sealing performance. At the same time, it should ensure that transport vehicles comply with relevant laws and regulations and standards, and have legal qualifications to go on the road.

2. Transportation Personnel Requirements The personnel
to transport DEIPA shall have relevant qualifications and operation skills, and have received professional training and corresponding certificates. Relevant regulations and standards shall be strictly observed during transportation to ensure transportation safety.

3. Transport packaging requirements The transport packaging
DEIPA shall comply with relevant standards and have the characteristics of corrosion resistance, compression resistance and shock resistance. The packaging shall be tight and firm to prevent leakage or breakage during transportation.

4. transportation route requirements
should choose a reasonable transportation route to avoid passing through densely populated areas, water source protection areas and other sensitive areas. At the same time, it is necessary to ensure that the transportation route is unimpeded and avoid factors such as congestion and delay affecting transportation safety.

3. emergency plan

In order to deal with the leakage, fire and other safety accidents that may occur during the storage and transportation of diethanolmonoisopropanolamine, corresponding emergency plans shall be formulated. The emergency plan shall include the following contents:

1. Organization and responsibilities: clarify the organization and respective responsibilities of emergency response to ensure that the emergency work is carried out in an orderly manner.
2. Early warning and reporting: establish an early warning mechanism to discover potential safety hazards in time; after an accident, it shall be reported in time according to the prescribed procedures and time.
3. Emergency response process: Describe the emergency response process in detail, including accident discovery, alarm, evacuation, rescue and other links.
4. Emergency equipment and materials: prepare the equipment and materials required for emergency in advance to ensure that they can be put into use in time in an emergency.
5. Training and drills: conduct training on emergency plans to improve the emergency awareness and operation skills of employees; conduct drills regularly to ensure the effectiveness of emergency plans.

In short, diethanol monoisopropanolamine, as a common raw material for chemical production, must strictly abide by relevant specifications during storage and transportation to ensure safety. Through the safety storage and transportation specifications and the formulation and implementation of emergency plans introduced in this paper, the safety risks can be effectively reduced and the safety in the production and use process can be guaranteed.