Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of decabromodiphenyl ethane

[Chemical Knowledge]：Specification for storage and transport of decabromodiphenyl ethane

Read： 486 Time：14months ago Source：Transform the World with Simplicity

The safety storage and transportation specification
of decabromodiphenyl ethane
Introduction

decabromodiphenyl ethane is a common chemical production raw material, widely used in plastics, rubber, textiles and other fields. However, due to its toxicity and flammability, strict compliance with relevant regulations is required during storage and transportation to ensure the safety of personnel and the environment. This article will introduce the safety storage and transportation regulations of decabromodiphenyl ethane.

1. the nature of decabromodiphenyl ethane

decabromodiphenyl ethane is a white crystalline powder with a high melting point and boiling point, insoluble in water, but soluble in organic solvents. It has strong toxicity and flammability, in case of open flame, high heat or oxidant contact, there is a risk of combustion and explosion.

2. decabromodiphenyl ethane storage specification

1. The storage place should choose a dry, ventilated, cool place, avoid direct sunlight and high temperature.
2. The storage site shall be equipped with fire fighting equipment and leakage emergency treatment equipment.
3. The storage container shall be made of materials with good sealing performance and corrosion resistance to avoid damage and leakage of the container.
4. During the storage process, the sealing and integrity of the container should be checked regularly, and any abnormality should be handled in time.
5. Obvious safety warning signs shall be set up in the storage place to prohibit fireworks and open fire operations.

3. decabromodiphenyl ethane transportation specifications

1. Before transportation, the integrity and tightness of the packaging container should be checked to ensure that there is no leakage during transportation.
2. Avoid direct sunlight and high temperature during transportation, and maintain good ventilation.
3. Transportation vehicles shall be provided with safety measures such as fire prevention, explosion-proof and anti-static.
4. During transportation, the road traffic safety regulations shall be observed, the speed shall be kept stable, and sudden braking and bumps shall be avoided.
5. Obvious safety warning signs shall be set during transportation to prohibit fireworks and open fire operations.

4. Decabromodiphenyl Ethane Leakage Emergency Treatment Specification

1. If a leak is found, the operation should be stopped immediately, the leak source should be closed, and the fire source should be cut off.
2. Use special equipment or tools for cleaning to avoid secondary pollution.
3. Wear protective clothing and gloves during cleaning to avoid direct contact with spills.
4. The cleaned waste shall be disposed in accordance with environmental protection requirements to avoid harm to the environment.

5. safety precautions

1. Operators should be professionally trained to understand the nature of decabromodiphenyl ethane and safe operating procedures.
2. Wear protective clothing and gloves during operation to avoid direct contact with decabromodiphenyl ethane.
3. Obvious safety warning signs shall be set up at the operation site to prohibit fireworks and open fire operations.
4. Keep good ventilation during operation to avoid harmful gases.
5. Clean and disinfect after the operation to keep the operation place clean and tidy.

conclusion

decabromodiphenyl ethane as a common chemical production raw material, its safe storage and transportation is very important. By complying with relevant regulations and safety precautions, the safety of personnel and the environment can be effectively guaranteed. Therefore, in practice, we should strictly abide by the relevant regulations and standards to ensure the safety and stability of chemical production.

Previous： Specification for storage and transport of tetrabromobisphenol A

Next： Specification for storage and transport of antimony trioxide

News Categories