Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of VAE emulsion

[Chemical Knowledge]：Specification for storage and transport of VAE emulsion

Read： 688 Time：14months ago Source：Transform the World with Simplicity

VAE emulsion safety storage and transport specification

Introduction

VAE emulsion as a common chemical production raw materials, widely used in adhesives, coatings, fabric treatment and other fields. However, due to its special chemical properties, VAE emulsion has certain safety risks during storage and transportation. In order to ensure the safe use of VAE emulsion, this article aims to detail its safe storage and transportation specifications.

1. the properties of VAE emulsion

VAE emulsion is an ethylene-vinyl acetate copolymer emulsion with good water resistance, weather resistance, chemical resistance and other characteristics. However, VAE emulsions are also flammable and explosive substances that may cause fires or explosions when exposed to open flames, high heat, or oxidants.

2. safety storage specification

1. Storage place selection: VAE emulsion should be stored in a cool, dry, well-ventilated special warehouse, away from fire and heat sources. The warehouse shall be equipped with fire prevention and explosion-proof facilities, and shall be inspected and maintained regularly.
2. Storage container requirements: The container for storing VAE emulsion should have the characteristics of corrosion resistance and good sealing performance to prevent emulsion leakage. At the same time, the container should be marked with the name of the substance, the nature of the hazard and safety measures.
3. Storage limit: According to the warehouse area and ventilation conditions, the storage capacity of VAE emulsion should be reasonably controlled to avoid safety risks caused by excessive storage.
4. Personnel management: warehouse management personnel should be professionally trained to understand the nature and safety operation procedures of VAE emulsion, and conduct regular safety inspections and inspections.

3. safety transport specification

1. transport vehicle selection: should choose special vehicles with dangerous goods transport qualification for VAE emulsion transport, to ensure that the vehicle is in good condition, equipped with the corresponding fire equipment and protective equipment.
2. transport container requirements: transport containers should comply with national standards, with corrosion resistance, pressure resistance, good sealing performance characteristics, to prevent leakage of emulsion. At the same time, the container should be marked with the name of the substance, the nature of the hazard and safety measures.
3. Transportation route planning: reasonable transportation routes should be selected to avoid passing through densely populated areas, important facilities and other sensitive areas. During transportation, you should abide by traffic rules, keep the speed stable, and avoid sudden braking, sharp turns and other operations.
4. Accompanied by personnel: professional personnel shall be accompanied during transportation to supervise transportation safety and deal with emergencies. At the same time, the accompanying personnel should have the corresponding knowledge of dangerous goods transportation and understand the emergency treatment measures.
5. Environmental conditions: During transportation, pay close attention to weather changes to avoid transportation under severe weather conditions. At the same time, the influence of adverse environmental factors such as high temperature and exposure on VAE emulsion should be avoided.

4. emergency treatment measures

1. fire treatment: in case of fire, immediately cut off the fire source and use foam, dry powder and other fire extinguishers to extinguish the fire. At the same time, should report to the local fire department, according to the guidance of the fire department for fire fighting operation.
2. Leakage treatment: In case of leakage of VAE emulsion, stop the leakage source immediately and use special equipment to collect the leakage to avoid the spread of the leakage. At the same time, the leakage area should be ventilated to eliminate potential safety hazards.

conclusion

VAE emulsion, as a common chemical raw material, has certain safety risks during storage and transportation. In order to ensure the safe use of VAE emulsion, we should follow the corresponding safety storage and transportation regulations, strengthen the training of management personnel, improve safety awareness, and ensure the standardization and standardization of operation procedures. At the same time, a sound emergency plan system should be established. Once a safety accident occurs, effective measures can be taken quickly to deal with it and reduce losses.

Previous： Specification for storage and transport of trichloroethylene

Next： Specification for storage and transport of diisobutylene

News Categories