Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of polymeric ferric sulfate

[Chemical Knowledge]：Specification for storage and transportation of polymeric ferric sulfate

Read： 648 Time：20months ago Source：Transform the World with Simplicity

Polymeric ferric sulfate (PFS) is an inorganic polymer flocculant, which is widely used in the field of chemical production raw materials. Due to its corrosive and toxic properties, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety. This paper will detail the specification of safe storage and transportation of polymeric ferric sulfate.

1. safety storage specification

1. storage site requirements
polymeric ferric sulfate should be stored in a dry, cool, well-ventilated special warehouse, avoid direct sunlight and high temperature environment. The warehouse floor should be flat, non-slip, and with anti-leakage measures. The storage place should be kept away from fire and heat sources, and stored separately from other chemicals to avoid interaction.
2. storage container requirements
polymeric ferric sulfate should be stored in a special container, the container should have the characteristics of corrosion resistance and good sealing performance. Storage containers shall be inspected and maintained regularly to ensure that they are in good condition and prevent leakage accidents.
3. Storage Management Requirements The
shall establish a strict storage management system for polymeric ferric sulfate, including records of warehousing, outbound, requisitioning and return. Obvious safety warning signs shall be set up in the storage area, and corresponding fire fighting equipment and leakage emergency treatment equipment shall be equipped.

2. safety transportation specification

1. transportation vehicle requirements
polymeric ferric sulfate should be transported by special transport vehicles, which should have anti-leakage, anti-static, fire prevention and other functions. The condition of the vehicle should be checked before transportation to ensure safety and reliability during transportation.
2. Transport packaging requirements
polymeric ferric sulfate should be used for special packaging bags or barrels for packaging, packaging should be tight, firm, to prevent leakage during transport. The packaging bag or barrel shall be marked with the product name, manufacturer, production date and other information.
3. Transportation management requires that relevant laws and regulations should be observed during
transportation, and transportation should be carried out in strict accordance with the prescribed route and time. Transport vehicles should maintain a constant speed, avoid sudden braking, sharp turns and other operations, in order to reduce the loss of goods and personnel injury. During transportation, professional escort personnel shall be equipped to supervise transportation safety and deal with emergencies.

3. emergency treatment measures

1. Leakage emergency treatment
In case of polyferric sulfate leakage accident, measures should be taken immediately to prevent the leakage from spreading and to deal with the leakage safely. The leakage can be covered and collected with adsorption materials such as sand and dry lime, and then sent to the designated place for disposal. Avoid contact with leakage during handling, and wear protective gloves, masks and other personal protective equipment.
2. Fire emergency treatment
If a fire accident occurs, the fire source should be cut off immediately, and fire extinguishers, fire extinguishers and other fire fighting equipment should be used to extinguish the fire. If the fire is large, the emergency plan should be started immediately and the personnel evacuation and rescue should be organized.

In short, as an important raw material for chemical production, the safe storage and transportation of polymeric ferric sulfate is very important. Relevant enterprises and individuals should strictly abide by relevant regulations, strengthen management and operation, and ensure safety and reliability during storage and transportation.

Previous： Specification for storage and transportation of sericite

Next： Storage Method and Transportation Specification of lithopone

News Categories