Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of semi-rigid foam

[Chemical Knowledge]：Specification for storage and transportation of semi-rigid foam

Read： 244 Time：19months ago Source：Transform the World with Simplicity

The safe storage and transportation specification
of semi-hard foam chemical production raw materials
1. Introduction

With the rapid development of the chemical industry, semi-hard foam, as an important chemical production raw material, is widely used in various fields. However, due to its special physical and chemical properties, semi-rigid foam has certain safety risks during storage and transportation. This specification is developed to ensure the safe storage and transportation of semi-rigid foam.

2. Specification Scope

This specification applies to the storage and transportation of raw materials for semi-rigid foam chemical production, including the entire supply chain from the manufacturer to the user.

3. safe storage

1. storage facilities: storage semi-hard foam facilities should have fire, explosion, lightning protection, anti-static and other safety facilities, and in line with the relevant national standards.
2. Storage environment: The storage environment of semi-hard foam should be dry, ventilated and cool, avoid direct sunlight, and keep away from fire and heat sources.
3. Storage capacity: The capacity of storage facilities should be reasonably designed according to the production scale and use requirements to ensure that the safety capacity of the facility is not exceeded.
4. Identification and warning: obvious identification and warning signs shall be set up in storage facilities to indicate the name, danger and emergency measures of stored substances.

4. safety transport

1. transport vehicles: transport semi-rigid foam vehicles should have the appropriate qualifications and certificates, and to ensure that the vehicle is in good condition, in line with transport requirements.
2. Transport personnel: transport personnel should be professionally trained, with appropriate operational skills and safety awareness.
3. Transport packaging: semi-hard foam packaging should comply with relevant national standards, with sufficient strength and sealing to prevent leakage and damage.
4. Transportation route: The transportation route shall be reasonably selected to avoid passing through densely populated areas and sensitive environments.

5. emergency measures

1. Leakage treatment: if semi-hard bubble leakage is found, measures should be taken immediately to prevent the leakage from spreading and clean up the leakage area.
2. Fire treatment: in case of fire, immediately use foam, dry powder and other fire extinguishing equipment to extinguish the fire, and report to the police in time.
3. Poisoning treatment: if any person is poisoned, the poisoned person shall be immediately moved to a ventilated place and sent to a doctor for treatment in time.

6. Training and Management

1. Training: Regular training should be conducted for personnel engaged in the storage and transportation of semi-rigid bubbles to improve their safety awareness and operational skills.
2. Management: The semi-rigid foam storage and transportation management system should be established and improved, and the job responsibilities and operation procedures should be clarified to ensure the effective implementation of various safety measures.

7. supervision and inspection

1. regulatory authorities: the relevant regulatory authorities should strengthen the supervision and inspection of semi-hard foam storage and transportation links to ensure that it meets the requirements of national laws and regulations and relevant standards.
2. Enterprise self-examination: production enterprises and users should regularly inspect and maintain the storage and transportation facilities of semi-hard foam to ensure their safe and reliable operation.

8. by-laws

1. This specification shall take effect from the date of promulgation. If there are any matters not covered, the relevant departments shall be responsible for the interpretation.
2. All production enterprises and users shall strictly abide by this specification to ensure the safe storage and transportation of semi-hard foam chemical production raw materials.

Previous： Specification for storage and transportation of rigid foam

Next： Specification for storage and transport of slow rebound foam

News Categories