Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of PPG

[Chemical Knowledge]：Specification for storage and transportation of PPG

Read： 270 Time：19months ago Source：Transform the World with Simplicity

PPG in the field of chemical production of raw materials in the safety of storage and transportation specifications

1. Introduction

PPG(Polypropylene Glycol) is a widely used in the field of chemical production of raw materials, has important industrial value. In order to ensure the safety of PPG during storage and transportation, this article will detail the relevant specifications and operating requirements.

2. the physical and chemical properties of PPG

PPG is a colorless, odorless, non-toxic liquid with high chemical and thermal stability, and can be used in a wide temperature range. At the same time, PPG has good wettability, permeability and emulsification, and can be used as a solvent, solubilizer, emulsifier and so on in the production of various chemical products.

3. PPG safety storage specification

1. Storage place requirements: PPG should be stored in a dry, cool, well-ventilated indoor place, avoid direct sunlight and high temperature environment.
2. Storage container requirements: PPG should be stored in a special sealed container, and the container should have good corrosion resistance and tightness to prevent leakage and pollution.
3. Storage limit requirements: The storage site should set a reasonable storage limit to avoid security risks caused by excessive storage.
4. Safety management requirements: The storage site shall establish a strict safety management system, including warehousing inspection, storage records, safety hazard investigation, etc.

4. PPG's safety transportation specifications

1. Transportation vehicle requirements: PPG should be transported by special transportation vehicles, and the vehicles should have good sealing and anti-collision performance to ensure safety during transportation.
2. Transport personnel requirements: Transport personnel should be professionally trained to understand the nature of PPG and transport requirements, with the ability to respond to emergencies.
3. Transportation route requirements: The transportation route should be reasonably selected to avoid passing through dangerous areas such as high temperature and open fire to ensure safety during transportation.
4. Requirements for transportation documents: relevant documents shall be prepared before transportation, including transportation contract, material safety data sheet (MSDS), transportation identification, etc., so as to check and deal with emergencies on the way.

5. PPG leakage emergency treatment specification

1. personnel protection: handling personnel should wear professional protective gloves, goggles and protective clothing to avoid direct contact with the leakage.
2. Leak treatment: When a leak occurs, the source of the leak should be stopped immediately, the leak should be absorbed with absorbent materials, and placed in a sealed container for treatment.
3. Environmental cleaning: clean up the leakage area to ensure that it will not cause pollution to the environment.

6. conclusion

PPG has important application value in the field of chemical production raw materials. In order to ensure the safety of its storage and transportation, it is necessary to strictly abide by the relevant specifications and operating requirements. By understanding the physical and chemical properties of PPG, mastering its safety storage and transportation specifications, as well as leakage emergency treatment specifications, we can effectively reduce safety risks and ensure the smooth progress of production activities.

Previous： Specification for storage and transport of NPG

Next： Specification for storage and transportation of POP

News Categories