Sản phẩm phenoxone

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of dibasic acid diols

[Chemical Knowledge]：Specification for storage and transportation of dibasic acid diols

Read： 633 Time：19months ago Source：Transform the World with Simplicity

In the field of chemical production raw materials, dibasic acid diols are a kind of common chemical substances, which are widely used in plastics, coatings, adhesives and other fields. However, due to its corrosive and flammable nature, it is necessary to strictly comply with relevant safety regulations during storage and transportation to ensure the safety of personnel and the environment. The physical and chemical properties of

1. dibasic acid diols

dibasic acid diols are usually corrosive and flammable, and can react with water, acid, alkali and other substances to generate heat and gas. In addition, dibasic acid diols are also toxic and harmful to the human body and the environment.

2. dibasic acid diol storage specification

1. storage place should be dry, ventilated, cool, and away from fire, heat and other hazards.
2. The storage container shall comply with relevant standards, and be corrosion-resistant, pressure-resistant and sealed to prevent leakage and volatilization.
3. Storage should be classified, clear identification, to avoid confusion and misuse.
4. The storage capacity shall be controlled within a safe range and shall not exceed the maximum storage capacity.
5. Fire fighting equipment and leakage emergency treatment equipment shall be set in the storage area to ensure safety.

3. dibasic acid diol transportation specifications

1. Before transportation, check whether the packaging is intact and whether the signs are clear to ensure transportation safety.
2. Relevant regulations and standards shall be observed during transportation to ensure the safety of transportation vehicles and personnel.
3. Avoid high temperature, open fire, static electricity and other dangerous factors during transportation to prevent combustion and explosion accidents.
4. Transportation should be classified during transportation to avoid confusion and misuse.
5. After the transportation arrives at the destination, it should be unloaded in time and check whether the goods are in good condition to ensure safety.

4. dibasic acid diol safety operation specification

1. before operation should understand the physical and chemical properties of dibasic acid diol, master the safe operation procedures.
2. Wear protective clothing, gloves, goggles and other personal protective equipment during operation to avoid direct contact.
3. During operation, parameters such as temperature and pressure shall be strictly controlled to prevent accidents such as over-temperature and over-pressure.
4. During the operation, pay close attention to the operation of the equipment, and deal with any abnormalities in time to ensure safety.
5. After the operation, the site should be cleaned in time to ensure environmental hygiene and safety.

In short, dibasic acid diols are important substances in chemical production raw materials, and their safety and standardization of storage and transportation are of great significance to ensure production safety and personnel health. Therefore, in the actual production process, we must strictly abide by the relevant safety specifications and operating procedures to ensure that the storage, transportation and use of dibasic acid diols are safe and reliable.

Previous： Specification for storage and transport of PPD

Next： Specification for storage and transport of NPG

News Categories