Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of graphite powder

[Chemical Knowledge]：Specification for storage and transportation of graphite powder

Read： 527 Time：20months ago Source：Transform the World with Simplicity

The safety of graphite powder storage and transportation specifications

1. Introduction

graphite powder as a common chemical production raw materials, widely used in metallurgy, casting, machinery, chemical and other industries. However, due to its special physical and chemical properties, graphite powder has certain safety hazards during storage and transportation. This specification is developed to ensure the safe storage and transportation of graphite powder.

2. the physical and chemical properties of graphite powder

graphite powder has the characteristics of black, light weight, easy to fly, insoluble in water, but can float on the water surface. The chemical properties of graphite powder are stable and it is not easy to react with other substances, but under high temperature conditions, it may react with some metal oxides.

3. graphite powder storage specification

1. The storage place should be selected in a dry, ventilated and cool place, avoiding direct sunlight and high temperature environment.
2. The storage site should be set up special storage equipment, such as sealed tanks, storage silos, etc., to ensure that the graphite powder will not leak and fly.
3. The storage site shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to deal with emergencies.
4. The storage equipment shall be inspected and maintained regularly during the storage process to ensure that it is intact.

4. graphite powder transportation specifications

1. Before transportation, check the condition of the transportation vehicle to ensure that it meets the transportation requirements and avoid leakage and flying during transportation.
2. During transportation, the vehicle speed should be kept stable, and operations such as sudden braking and sharp turns should be avoided to reduce the flying and loss of graphite powder during transportation.
3. During transportation, protective measures should be taken, such as covering tarpaulin, etc., to avoid the influence of natural factors such as wind and rain on graphite powder.
4. Relevant laws, regulations and regulations shall be observed during transportation to ensure transportation safety.

5. graphite powder safety operation specification

1. in the operation of graphite powder, should wear corresponding protective equipment, such as masks, gloves, etc., to avoid graphite powder into the respiratory tract and contact with the skin.
2. In the process of operation, we should maintain a stable state of mind and correct operation methods to avoid misoperation and accidents.
3. In case of leakage and flying during operation, measures should be taken immediately to clean up and deal with it to avoid pollution to the environment and injury to personnel.

6. graphite powder waste treatment specification

1. waste graphite powder should be treated in accordance with relevant environmental regulations to avoid environmental pollution.
2. The waste graphite powder can be treated by recycling and reuse to improve the utilization rate of resources.

7. summary

graphite powder as a common raw material for chemical production, there are certain security risks in the process of storage and transportation. In order to ensure the safe storage and transportation of graphite powder, it is necessary to comply with the corresponding specifications and operating requirements. At the same time, it is also necessary to pay attention to safety matters and waste disposal specifications during operation to ensure the safety and environmental protection of the production process.

Previous： Specification for storage and transportation of activated carbon

Next： Specification for storage and transportation of electrolytic copper

News Categories