Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of manganese sulfate

[Chemical Knowledge]：Specification for storage and transportation of manganese sulfate

Read： 481 Time：19months ago Source：Transform the World with Simplicity

Safety of Manganese Sulfate Storage and Transportation Specifications

1. Introduction

Manganese sulfate is a common chemical production raw materials, widely used in metallurgy, agriculture, ceramics, medicine and other fields. However, due to its risk, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety. This article will detail the safe storage and transportation specifications of manganese sulfate.

2. properties and hazardous
of manganese sulfate
Manganese sulfate is an inorganic salt, usually a pink crystalline powder, which is hygroscopic. It is soluble in water, but not in ethanol. Manganese sulfate will decompose under certain conditions, resulting in toxic manganese vapor and sulfuric acid mist. In addition, manganese sulfate is also corrosive, which is harmful to metal containers, human skin and eyes.

3. manganese sulfate storage specification

1. The storage place should choose a dry, ventilated and cool place to avoid direct sunlight and high temperature.
2. Storage containers should be made of corrosion-resistant materials, such as plastic or glass steel containers, to avoid the use of metal containers.
3. During storage, the tightness of the container should be checked regularly to prevent leakage.
4. The storage area shall be provided with obvious safety signs and warning signs to prohibit fireworks.
5. Storage personnel should be professionally trained to understand the nature of manganese sulfate and safe operating procedures.

4. of manganese sulfate transport specifications

1. transport vehicles should have the appropriate qualifications and certificates, transport personnel should undergo professional training.
2. During transportation, ensure that the container is well sealed to prevent leakage.
3. Transportation vehicles shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
4. During transportation, high temperature and open fire should be avoided, and mixed transportation with oxidants, acids and other substances is prohibited.
5. Road traffic safety regulations shall be observed during transportation to ensure driving safety.

5. manganese sulfate leakage emergency treatment

1. In case of leakage, the leakage source should be cut off immediately, mixed with sand or other non-combustible adsorbent absorption, and collected into the container.
2. In case of a large amount of leakage, embankments or pits shall be constructed and transferred to the tank car or special collector by pump.
3. If ingested by mistake, rinse your mouth immediately, drink milk or egg white, and seek medical attention immediately. In case of contact with eyes, immediately lift the eyelids, rinse thoroughly with plenty of flowing water or saline and seek medical attention immediately.

6. conclusion

manganese sulfate as an important raw material for chemical production, its safe storage and transportation is very important. By strictly complying with the storage and transportation specifications, the danger of manganese sulfate during storage and transportation can be effectively reduced, and the safety of personnel and the environment can be guaranteed. Therefore, relevant enterprises and personnel should fully understand the nature and danger of manganese sulfate, strictly abide by the storage and transportation specifications, and ensure the safe use of manganese sulfate.

Previous： Specification for storage and transport of tin dioxide

Next： Specification for storage and transport of thionyl chloride

News Categories