Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of potassium waterglass

[Chemical Knowledge]：Specification for storage and transport of potassium waterglass

Read： 861 Time：14months ago Source：Transform the World with Simplicity

In the field of chemical production raw materials, potassium water glass is a common inorganic chemical raw material, which is widely used in glass, ceramics, soap, detergent, food additives and other fields. However, due to its risk, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety. This article will detail the safe storage and transportation specifications of potassium water glass.

1. potassium water glass properties and hazardous

potassium water glass is a colorless or light yellow transparent liquid, with strong alkaline and corrosive. The risk is mainly manifested in the following aspects:

1. Irritation: Potassium water glass is irritating to the skin and eyes, and may cause redness, pain and other symptoms after contact.

2. Corrosion: Potassium water glass is corrosive to metal, rubber and other materials, which may cause container damage or equipment failure.

3. Combustibility: Potassium water glass reacts with acids, acidic oxides and other substances to produce a lot of heat and gas, which may lead to combustion or explosion.
Safety storage specifications for
2. potassium water glass

In order to ensure the safe storage of potassium water glass, the following specifications need to be observed:

1. The storage place should be dry, ventilated, and cool, avoiding direct sunlight and high temperatures.

2. Storage containers should be made of corrosion-resistant materials, such as polyethylene, polypropylene and other plastic products.

3. The storage container should be well sealed to prevent leakage and volatilization.

4. The storage area should be set up with obvious safety signs and warning signs, and open flames and smoking are prohibited.

5. During the storage process, regular safety inspection and maintenance should be carried out to ensure the normal operation of storage facilities.
Safety transportation specifications for
3. potassium water glass

In order to ensure the safe transportation of potassium water glass, the following specifications need to be observed:

1. The safety and reliability of the transportation vehicle should be checked before transportation to ensure that the vehicle is in good condition.

2. Keep running smoothly during transportation to avoid severe vibration and collision.

3. The transport container should be made of corrosion-resistant materials and sealed well to prevent leakage and volatilization.

4. Avoid contact with acids, acid oxides and other substances during transportation to avoid combustion or explosion.

5. Obvious safety signs and warning signs shall be set up during transportation, and relevant transportation regulations and safe operation procedures shall be observed.

4. potassium water glass leakage emergency treatment measures

In the storage and transportation of potassium water glass, once a leakage accident occurs, the following emergency treatment measures should be taken:

1. Immediately cut off the leakage source, close the valve or container to prevent the leakage spread.

2. Use sand, dry lime and other adsorption materials to cover and absorb the leakage to avoid flowing into sewers or drains.

3. Use plenty of water to flush the leakage area, dilute the leakage and reduce its concentration.

4. If the leakage into the eyes or skin, should immediately use plenty of water rinse, and medical treatment.

In short, potassium water glass, as a common inorganic chemical raw material, needs to strictly abide by relevant regulations during storage and transportation to ensure safety. By understanding its nature and danger, taking correct storage and transportation measures, and mastering emergency treatment methods, accidents can be effectively prevented and the safety of people's lives and property can be guaranteed.

Previous： Specification for storage and transport of hydroxylamine sulfate

Next： Specification for storage and transport of praseodymium oxide

News Categories