Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of zinc sulfate

[Chemical Knowledge]：Specification for storage and transportation of zinc sulfate

Read： 429 Time：20months ago Source：Transform the World with Simplicity

Zinc sulfate in the field of chemical production of raw materials in the safety of storage and transportation specifications

1. Introduction

zinc sulfate is a common inorganic salt, widely used in chemical, agriculture, medicine and other fields. Because it is dangerous and corrosive, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety. This article will detail the safe storage and transportation specifications of zinc sulfate.

2. properties and hazardous
of zinc sulfate
Zinc sulfate is a white or yellowish crystalline powder with strong hygroscopicity. It reacts with water to produce sulfuric acid and zinc hydroxide, and releases a large amount of heat. Zinc sulfate is irritating to the eyes, skin and respiratory tract. Inhalation or excessive intake may cause poisoning. In addition, zinc sulfate is corrosive and can cause damage to metal containers and equipment.

3. zinc sulfate storage specification

1. storage place should be dry, well ventilated, avoid direct sunlight. The storage temperature should be controlled below 25 ℃, and the relative humidity should not exceed 75%.
2. Zinc sulfate should be stored in a sealed container to avoid contact with air. Containers shall be corrosion resistant and regularly inspected and maintained to ensure that they are in good condition.
3. The storage area shall be provided with obvious safety signs, and fireworks and open fire operations are prohibited. The storage site shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. Inventory and inspection shall be carried out regularly during storage to ensure the quantity and quality safety of zinc sulfate. Any abnormal situation shall be handled in time and reported to the superior.

4. zinc sulfate transport specifications

1. Transport vehicles should have the appropriate qualifications and certificates, the driver should undergo professional training and obtain the appropriate qualification certificate. Road traffic safety laws and regulations shall be observed during transportation.
2. Zinc sulfate shall be transported in special sealed containers with anti-corrosion properties and marked with obvious dangerous goods identification. Vessel breakage and leakage shall be avoided during transportation.
3. Keep running smoothly during transportation to avoid severe vibration and collision. In case of emergency, timely measures shall be taken to ensure the safety of personnel and vehicles.
4. During transportation, close contact should be maintained with the consignee to ensure the timely and safe delivery of the goods. The consignee shall inspect and accept the goods, and deal with the abnormal situation in time and report to the relevant departments.

5. zinc sulfate safety operation specification

1. operators should undergo professional training, understand the nature and danger of zinc sulfate, master the safety operation procedures and emergency treatment methods.
2. Before operation, check whether the equipment and containers are intact to ensure that there will be no leakage and accidents during operation.
3. Wear protective clothing, gloves, goggles and other personal protective equipment during operation to avoid direct contact with zinc sulfate.
4. Good ventilation should be maintained during operation to avoid inhalation of zinc sulfate dust and irritating gases.
5. After the operation, the equipment and site shall be cleaned and arranged to ensure environmental hygiene and production safety.

6. emergency plan and treatment measures

1. Emergency plan and treatment measures should be established and improved, and the process and method for dealing with zinc sulfate leakage, fire and other emergencies should be clarified.
2. Emergency drills and training shall be conducted regularly to improve the safety awareness and emergency handling ability of employees.
3. In case of emergency, the emergency plan shall be started immediately, and personnel shall be organized for rescue and treatment to avoid the expansion of the accident.

summary: As a common raw material for chemical production, zinc sulfate needs to strictly abide by relevant specifications during storage and transportation to ensure safety. By understanding the nature and danger of zinc sulfate, complying with storage and transportation specifications, mastering safe operation procedures and emergency treatment methods, production safety and personnel health can be effectively guaranteed.

Previous： Specification for storage and transport of samarium oxide

Next： Specification for storage and transport of tetrahydrofurfuryl alcohol

News Categories