Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of sodium fluoride

[Chemical Knowledge]：Specification for storage and transport of sodium fluoride

Read： 624 Time：20months ago Source：Transform the World with Simplicity

Safety of Sodium Fluoride Storage and Transportation Specifications

1. Introduction

Sodium fluoride is an important inorganic chemicals, widely used in chemical industry, metallurgy, medicine and other fields. Due to its corrosive and toxic properties, the relevant regulations must be strictly observed during storage and transportation to ensure personnel safety and environmental protection. This article will detail the safe storage and transportation specifications for sodium fluoride.

2. the properties and hazards of sodium fluoride

Sodium fluoride is a white crystalline powder with strong corrosion and toxicity. It has an irritating effect on the skin, eyes and respiratory tract. Inhalation or intake of sodium fluoride can cause poisoning, which can lead to death in severe cases. Therefore, in the storage and transportation of sodium fluoride, effective measures must be taken to prevent its leakage, combustion, explosion and other accidents.

3. sodium fluoride storage specification

1. The storage place should choose a dry, ventilated, cool place, avoid direct sunlight and high temperature.

2. The storage container should be made of corrosion-resistant materials, such as polyethylene and polypropylene, and should be inspected and maintained regularly to ensure that the container is intact.

3. Obvious warning signs and safety signs shall be set up in the storage area, and fireworks and open fire operations are prohibited.

4. Keep dry during storage, avoid contact with water, and prevent deliquescence and agglomeration.

5. The storage area shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment to deal with emergencies.

4. sodium fluoride transport specification

1. should check the packaging is intact before transport, if there is damage should be replaced in a timely manner.

2. It should be stable during transportation, avoid violent vibration and collision, and prevent package damage and leakage.

3. Transport vehicles should have corresponding qualifications and certificates, and drivers should be professionally trained to be familiar with the nature and hazards of sodium fluoride.

4. During transportation, high temperature and open fire should be avoided, and it is forbidden to mix with oxidants, acids and other substances.

5. During transportation, corresponding fire-fighting equipment and leakage emergency treatment equipment shall be equipped to deal with emergencies.

5. sodium fluoride leakage emergency treatment

1. In case of leakage, immediately start the emergency plan and organize professionals to deal with it.

2. Warning line shall be set up in the leakage area to prohibit irrelevant personnel from entering, and effective measures shall be taken to prevent the leakage from spreading.

3. Special equipment should be used to collect the leakage, avoid direct contact with the leakage, and prevent poisoning and burns.

4. Leakage after collection should be properly handled to avoid pollution to the environment.

6. conclusion

sodium fluoride as an important inorganic chemical, its safety and environmental protection is of great significance for the protection of personnel health and environmental safety. Therefore, when storing and transporting sodium fluoride, it is necessary to strictly comply with relevant regulations and take effective measures to ensure personnel safety and environmental protection. At the same time, the formulation and implementation of emergency plans should be strengthened to improve the ability to respond to emergencies and ensure the safe and stable operation of production.

Previous： Specification for storage and transport of calcium chloride dihydrate pellets

Next： Specification for storage and transport of copper sulfate

News Categories