Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of ammonium heptamolybdate

[Chemical Knowledge]：Specification for storage and transport of ammonium heptamolybdate

Read： 816 Time：20months ago Source：Transform the World with Simplicity

Ammonium heptamolybdate (Ammonium heptamolybdate) is an important chemical raw material, widely used in catalysts, preservatives, pigments and other fields. Because of its certain danger, it is necessary to strictly abide by relevant regulations during storage and transportation to ensure safety. This article will detail the safety storage and transportation specifications of ammonium heptamolybdate.

1. the risk of ammonium heptamolybdate

ammonium heptamolybdate is a colorless or slightly yellow crystalline powder, with strong toxicity, corrosion and oxidation. If it comes into contact with acids, alkalis, reducing agents and other substances, it may cause chemical reactions and produce toxic and harmful gases. In addition, ammonium heptamolybdate may also cause harm to the environment and human health, so special attention needs to be paid to its safe storage and transportation.

2. ammonium heptamolybdate storage specification

1. The storage place should be dry, ventilated, cool, avoid direct sunlight and high temperature.
2. Storage containers should be well sealed to prevent moisture and contamination.
3. The storage area should be away from fire, heat and inflammable and explosive materials to avoid fire or explosion accidents.
4. The container and storage environment should be checked regularly during storage to ensure storage security.

3. of ammonium heptamolybdate transport specification

1. before transport should check whether the packaging is in good condition, such as damage should be dealt with in a timely manner.
2. During transportation, severe vibration, collision and friction should be prevented to avoid fire or explosion accidents.
3. Transportation vehicles shall be provided with safety measures such as fire prevention, explosion-proof and anti-static to ensure transportation safety.
4. During transportation, avoid high temperature, open flame and direct sunlight, and maintain good ventilation.

4. ammonium heptamolybdate leakage treatment specification

in case of ammonium heptamolybdate leakage accident, the following measures should be taken:

1. immediately cut off the leakage source to prevent the leakage from spreading.
2. Use special equipment or tools to clean up the leakage and avoid direct contact.
3. Place the cleaned-up spills in designated hazardous waste disposal sites to avoid harm to the environment and human health.
4. Clean and disinfect the leakage area to eliminate potential safety hazards.

In short, ammonium heptamolybdate is an important raw material for chemical production, and its safe storage and transportation are very important. Relevant enterprises and individuals should strictly abide by relevant regulations to ensure safety during storage and transportation, and avoid harm to the environment and human health.

Previous： Specification for storage and transport of ammonium potassium persulfate

Next： Specification for storage and transport of calcium dihydrogen phosphate

News Categories