Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of ammonium persulfate

[Chemical Knowledge]：Specification for storage and transportation of ammonium persulfate

Read： 1056 Time：12months ago Source：Transform the World with Simplicity

Ammonium persulfate is a commonly used chemical raw material, because of its strong oxidation and certain danger, it is necessary to strictly abide by the relevant safety regulations in the process of storage and transportation. This article will detail the safety storage and transportation specifications of ammonium persulfate.

1. the risk of ammonium persulfate

ammonium persulfate is a white crystalline powder, with strong oxidizing and corrosive. It and organic matter, reducing agent, flammable material contact will cause combustion or explosion, but also on the human skin and eyes to cause irritation and damage. Therefore, during storage and transportation, special attention needs to be paid to its safety.

2. ammonium persulfate storage specification

1. storage place should be dry, ventilated, moisture, and avoid direct sunlight.

2. The storage place should be away from fire, heat and flammable and explosive materials, and should avoid mixing with organic matter, reducing agent, acid and other items.

3. The storage container should be sealed to prevent air leakage or moisture.

4. During the storage process, the integrity and tightness of the container should be checked regularly, and the abnormality should be handled in time.

5. The storage site should be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to ensure safety.

3. ammonium persulfate transport specification

1. transport vehicles should have the appropriate qualifications and certificates, transport personnel should be professionally trained and hold the appropriate certificate.

2. During transportation, it should be kept stable and avoid violent vibration, collision or friction.

3. Transport vehicles should be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment to ensure safety.

4. In the process of transportation should avoid high temperature, fire and static and other risk factors, at the same time should pay attention to moistureproof and sunscreen.

5. In the process of transportation, relevant laws, regulations and regulations should be strictly observed to ensure safe transportation.

4. ammonium persulfate leakage emergency treatment specification

1. found after the leak, should immediately take measures to prevent the spread of leakage, at the same time close the corresponding valve or take other measures to cut off the source of leakage.

2. For a small amount of leakage, sand, dry lime or soda ash can be mixed and recycled; for a large amount of leakage, a dike or pit should be built to accommodate it, and at the same time, a pump should be used to transfer it to a tank car or a special collector for recycling.

3. Recycled materials should be transported to the waste treatment site for disposal, and shall not be dumped or discharged at will.

4. When dealing with the leakage, you should wear the corresponding protective equipment to avoid harm to the human body.

In short, ammonium persulfate, as a commonly used raw material for chemical production, needs to strictly abide by relevant safety regulations during storage and transportation to ensure its safety and stability. At the same time, in the event of an emergency such as leakage, measures should be taken in time for emergency treatment to avoid harm to the environment and the human body.

Previous： Specification for storage and transportation of barite powder

Next： Specification for storage and transportation of sodium stannate

News Categories