Read: 507
Time:14months ago
Source:Transform the World with Simplicity
The safety storage and transportation specification
of butyl wax in the field of chemical production raw materials
1. Introduction
butyl wax is a common chemical production raw material, widely used in plastics, rubber, inks, coatings and other fields. However, due to its flammable and toxic properties, the relevant regulations must be strictly observed during storage and transportation to ensure the safety of personnel and the environment. This article will detail the safety storage and transportation specifications of butyl cerylate.
2. the physicochemical properties of butyl cerate
butyl cerate is a colorless transparent liquid with a light fruit flavor. Its molecular formula is C12H24O2 and its molecular weight is 198.32. Butyl cerate is insoluble in water, but miscible with ethanol, ether and other organic solvents. Its flash point is low, flammable, in case of open flame, high heat caused by combustion. In addition, butyl cerate has an irritating effect on the eyes, skin and respiratory tract.
3. safety of butyl cerate storage specification
1. storage place should choose cool, ventilated, dry place, away from fire, heat source. Storage temperature should not exceed 30 ℃, avoid direct sunlight.
2. The storage container shall be a special container with good sealing performance to avoid leakage. Storage containers should be inspected and maintained regularly to ensure that they are in good condition.
3. The storage area shall be provided with obvious safety warning signs, and equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. During the storage process, safety inspection shall be carried out regularly, including checking the tightness of the container and the ventilation of the storage place.
4. safety transportation specifications for butyl cerate
1. Transport vehicles should have corresponding transportation qualifications, and drivers should undergo professional training and obtain corresponding qualification certificates.
2. During transportation, the road traffic safety regulations shall be complied with, the speed shall be kept stable, and operations such as sudden braking and sharp turning shall be avoided.
3. Transportation vehicles shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to deal with possible accidents.
4. Avoid direct sunlight during transportation and maintain good ventilation. The interior of the transport vehicle shall be kept dry to avoid contact with acid, alkali and other corrosive substances.
5. During transportation, regular safety inspections should be carried out, including inspection of the braking system of the vehicle, tire wear, etc., to ensure transportation safety.
5. Butyl Cure Leakage Emergency Treatment Specification
1. When butyl cerate leaks are found, the operation should be stopped immediately, and the leakage source should be closed to prevent the leakage from spreading.
2. For a small amount of leakage, sand, dry lime or soda ash can be mixed and recycled into a special container.
3. For a large number of leaks, embankments or pits shall be constructed and covered with foam to reduce the evaporation disaster of the leaked materials. Transfer to tank truck or special collector with explosion-proof pump, recycle or transport to waste treatment site for disposal.
4. If leakage enters restricted spaces such as sewers and drains, immediately remove all ignition sources, including open flames, smoking, non-explosion-proof electrical equipment and tools. Cover the surface of the leak with foam to inhibit its evaporation. Brush with the emulsion made of non-combustible dispersant, and put the diluted wash water into the waste water system. If there is a large amount of leakage, use the dam to accommodate it, and then collect, transfer, recycle or discard it after harmless treatment.
6. conclusion
butyl cerate as a common chemical production raw material, in the process of storage and transportation must strictly abide by the relevant norms, in order to ensure the safety of personnel and the environment. By understanding the physical and chemical properties of butyl cerylate, safety storage specifications, safety transportation specifications and leakage emergency treatment specifications, we can effectively prevent and deal with possible safety accidents and ensure the smooth progress of chemical production process.