Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of butyl stearate

[Chemical Knowledge]：Specification for storage and transportation of butyl stearate

Read： 425 Time：14months ago Source：Transform the World with Simplicity

1. of safety storage and transportation specification
of butyl stearate Introduction

Butyl stearate is a common chemical production raw material, widely used in plastics, rubber, cosmetics and other industries. However, butyl stearate may cause safety incidents if stored and transported improperly, so it is important to understand its safe storage and transportation regulations.

2. the nature and hazard of butyl stearate

butyl stearate is a colorless transparent liquid with a faint odor. It is not easily soluble in water, but is soluble in most organic solvents. Butyl stearate is irritating to the skin and eyes, and prolonged exposure or inhalation may cause health problems such as skin allergies and respiratory diseases. In addition, butyl stearate is also flammable, in case of open flame, high heat or oxidant contact, there is a risk of combustion and explosion.

3. butyl stearate storage specification

1. The storage place should choose a cool, ventilated and dry place, away from fire and heat sources.
2. The storage container should use stainless steel or plastic container with good sealing performance, and avoid using iron container to avoid chemical reaction.
3. During storage, regular inspections should be carried out to ensure that the container is intact and to prevent leakage.
4. The storage area shall be provided with obvious safety signs and equipped with corresponding fire fighting equipment.

4. butyl stearate transport specifications

1. transport vehicles should have the appropriate qualifications and certificates to ensure the safety of the transport process.
2. Before transportation, check whether the packaging of butyl stearate is in good condition, and deal with any damage in time.
3. Keep stable during transportation, avoid direct sunlight and high temperature environment.
4. Transportation vehicles shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.

5. of butyl stearate safe operating procedures

1. Operators should be professionally trained to understand the nature of butyl stearate and safe operating procedures.
2. Check whether the equipment is in good condition before operation, and handle any abnormality in time.
3. Good ventilation should be maintained during operation to avoid prolonged exposure to volatile gases from butyl stearate.
4. After the operation, the site should be cleaned in time to ensure that the equipment is clean and tidy.

6. Butyl Stearate Leakage Emergency Treatment

1. In case of leakage accident, the leakage source should be cut off immediately, and the residual liquid should be absorbed by mixing sand, dry lime or soda ash.
2. When there is a large amount of leakage, a dam or a pit shall be built to accommodate it, and the tank car or special collector shall be transferred by pump.
3. Recycle or transport to the waste treatment site for disposal, and avoid entering the restricted space such as sewers and flood discharge ditches.

7. conclusion

butyl stearate as a common chemical raw material, its safe storage and transportation is very important. By understanding its nature and hazards, strictly abiding by storage and transportation specifications, mastering safety operation procedures and leakage emergency treatment methods, it can effectively prevent the occurrence of safety accidents and ensure production safety and personnel health.

Previous： Specification for storage and transport of dibutyl ester

Next： Specification for storage and transport of phosphate esters

News Categories