Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Specification for the mode of storage and transport of the Glycols

[Chemical Knowledge]：Specification for the mode of storage and transport of the Glycols

Read： 619 Time：14months ago Source：Transform the World with Simplicity

Title: Safety storage and transportation specifications
in the field of chemical production raw materials
, as an important raw material for chemical production, is widely used in plastics, synthetic fibers, solvents, antifreeze and other fields. However, due to its unique chemical properties, there are certain safety risks during storage and transportation. In order to ensure the safe use of thenediol, the relevant storage and transport norms must be strictly observed.

1. of the physical and chemical properties and hazard overview of the
of the
of the diol is a colorless and transparent, with a pleasant smell of liquid, miscible with water, ethanol, ether and other solvents. The steam and air can form an explosive mixture, fire, high heat caused by combustion explosion. In addition, it is also toxic and irritant, and has a serious irritating effect on human skin and eyes.

2. of the storage specification

1. The storage place should be in a cool, well-ventilated place away from the fire source. The storage temperature should be controlled below 30 ℃, avoid direct sunlight.
2. The storage container must be well sealed to prevent leakage. Containers and their seals should be inspected regularly to ensure that they are intact.
3. The storage area shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
4. Storage personnel should be professionally trained to understand the nature and safe operating procedures of Pedonide.

3. of the transport specification

1. Transport vehicles should meet the transport requirements of dangerous goods, equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
2. Keep running smoothly during transportation to avoid severe vibration, collision and friction.
3. Transport personnel shall be professionally trained to understand the nature and safe operation procedures of the Pedonide.
4. Pay close attention to weather changes during transportation to avoid transportation under severe weather such as high temperature and lightning.
Emergency treatment of leakage of
4. and

1. In case of leakage, the leakage source should be cut off immediately and the residual liquid should be absorbed by mixing sand, dry lime or soda ash.
2. When there is a large amount of leakage, a dam or a pit shall be built to accommodate it, and the tank car or special collector shall be transferred by pump.
3. Ventilate the leakage area to ensure air circulation.
4. If you ingest or inhale a drug, you should seek medical treatment immediately. For skin contact, immediately remove contaminated clothing and rinse with a large amount of flowing water for at least 15 minutes; for eye contact, immediately lift the eyelids and rinse thoroughly with a large amount of flowing water or saline for at least 15 minutes.

In short, in order to ensure the safe use of PMD in the field of chemical production raw materials, it is necessary to strictly abide by its storage and transportation regulations, strengthen the professional training of management and operation personnel, improve safety awareness, and ensure personal and property safety.

Previous： Specification for storage and transport of 1.3-butanediol

Next： Specification for storage and transportation of cetyl alcohol

News Categories