Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of isooctane

[Chemical Knowledge]：Specification for storage and transport of isooctane

Read： 687 Time：20months ago Source：Transform the World with Simplicity

1. of safety storage and transportation specifications
of isooctane in the field of chemical production raw materials Introduction

Isooctane is a common chemical production raw material, widely used in petrochemical, pharmaceutical, pesticide and other fields. Because of its flammable, explosive, toxic and other characteristics, it is necessary to strictly abide by relevant specifications during storage and transportation to ensure safety. This article will detail the safe storage and transportation specifications for isooctane.

2. the physical and chemical properties of isooctane

isooctane is a colorless and transparent liquid with a pungent odor. It is insoluble in water but miscible with most organic solvents. Isooctane has a low flash point, is easy to burn, and has a wide explosion limit, so it has a high risk.

3. isooctane safety storage specification

1. The storage place should choose a cool, ventilated and dry place, away from fire, heat and direct sunlight.
2. The storage container shall be a special metal or plastic container, and ensure that the container has good airtightness to prevent leakage.
3. The storage area shall be provided with obvious safety warning signs, and equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. During the storage process, the safety status of containers and storage areas should be checked regularly, and any abnormalities should be handled in time.

4. isooctane safety transport specification

1. transport vehicles should meet the relevant standards, with effective fire, explosion, leakage and other safety facilities.
2. During transportation, the vehicle shall be driven stably to avoid violent vibration, collision and friction to prevent damage and leakage of the container.
3. Transportation personnel should be professionally trained and familiar with the physical and chemical properties and safety transportation specifications of isooctane.
4. Relevant laws and regulations shall be observed during transportation to ensure transportation safety.

5. isooctane leakage emergency treatment

1. found isooctane leakage, should immediately cut off the source of leakage, and take effective measures to prevent the spread of leakage.
2. For a small amount of leakage, sand, dry lime or soda ash can be mixed and recycled; for a large amount of leakage, embankments or pits should be built and covered with foam to reduce steam disasters.
3. When handling the leakage, wear professional protective gloves and face mask to avoid direct contact with the leakage.
4. In case of fire, the fire source shall be cut off immediately, and the fire extinguishing equipment such as foam, dry powder and carbon dioxide shall be used to extinguish the fire. At the same time, should report to the fire department, seek professional rescue.

6. conclusion

isooctane as a common chemical production raw material, its safe storage and transportation is very important. By strictly complying with relevant specifications, selecting appropriate storage and transportation conditions, and mastering emergency treatment methods, the storage and transportation safety of isooctane can be effectively guaranteed, and a stable and safe supply of raw materials can be provided for chemical production.

Previous： Specification for storage and transport of polyisobutylene

Next： Specification for storage and transport of dipentene

News Categories