Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of BCS

[Chemical Knowledge]：Specification for storage and transport of BCS

Read： 724 Time：13months ago Source：Transform the World with Simplicity

In the field of chemical production raw materials, BCS (alkaline absorbent), as a common chemical raw material, is widely used in desulfurization, denitrification, dust removal and other processes. However, due to its special chemical properties, BCS has certain safety risks during storage and transportation. In order to ensure the safe storage and transportation of BCS, this article will discuss the relevant specifications and safety measures.

1. the physical and chemical properties of BCS

BCS is usually white or light yellow powder or particles, with strong alkaline absorption capacity. It can react with acid gases to form the corresponding salt compounds. However, BCS is hygroscopic, reacts with water to form a corrosive liquid, and releases a large amount of heat. Therefore, during storage and transportation, special care must be taken to prevent moisture and contact with water.

2. BCS security storage specification

1. Storage facilities: BCS should be stored in a dry, ventilated, rainproof special warehouse. The floor of the warehouse shall be paved with non-slip materials, and funnels and collection tanks shall be provided to prevent liquid leakage and corrosion.
2. Storage container: BCS should be stored in a special container, which should be sealed to prevent moisture and air from entering. At the same time, the container should be marked with a clear identification, indicating the name of the article, danger and precautions.
3. Storage management: The storage area should be managed by special personnel, and the integrity of storage facilities and containers should be checked regularly, and potential safety hazards such as leakage and moisture should be found and dealt with in time. At the same time, the warehouse should be cleaned and maintained regularly to keep the environment clean and tidy.

3. BCS safety transport specification

1. Transport vehicles: transport vehicles with corresponding qualifications and experience should be selected to ensure that the vehicles are in good condition and have anti-skid, anti-leakage and other functions.
2. Transport packaging: BCS should be packaged with special packaging bags or containers. The packaging bags or containers should have sealing performance and shockproof performance to prevent leakage or damage during transportation.
3. Transportation route: A reasonable transportation route should be selected to avoid driving in bad weather or road conditions to ensure transportation safety. At the same time, we should abide by the relevant traffic rules and laws and regulations, keep the speed stable, and prevent the sudden braking and other acts from causing damage to the goods.
4. Transport personnel: Transport personnel should be professionally trained to understand the nature of BCS and transport safety knowledge, with the ability to respond to emergencies. In the process of transportation, should maintain communication with the owner, timely feedback of the goods and transport progress.

4. emergency treatment measures

in the process of storage and transportation, in case of BCS leakage, fire and other emergencies, the following emergency treatment measures should be taken:

1. Immediately start the emergency plan and organize professionals to deal with it to prevent the situation from expanding.
2. Use special absorbent materials to clean up the leakage, avoid contact with water, prevent corrosion and pollution of the environment.
3. For emergencies such as fire, fire fighting equipment such as dry powder and carbon dioxide shall be used for fire fighting, and water shall not be used for fire fighting.
4. In the process of handling, personal protection and on-site vigilance should be done to avoid casualties and property losses.

In short, in order to ensure the safe storage and transportation of BCS in the field of chemical production raw materials, it is necessary to strictly abide by relevant regulations and safety measures, strengthen management and training, and improve safety awareness. Only in this way can we ensure the smooth progress of the production process and the safety and health of employees.

Previous： Specification for storage and transport of acetate

Next： Specification for storage and transportation of PM/PMA

News Categories