[Chemical Knowledge]：L-75 storage methods and transport specifications

L-75 chemical production of raw materials safety storage and transportation specification

1. introduction

with the rapid development of the chemical industry, all kinds of chemical production of raw materials storage and transportation safety issues have become increasingly prominent. As a common raw material for chemical production, the safe storage and transportation of L-75 is very important. In order to ensure the safety of L-75 in the process of production, storage and transportation, it is imperative to formulate a set of strict standards. This article will elaborate on the safety of L-75 storage and transportation specifications to ensure the smooth progress of the production process and the safety of employees and the environment. The physical and chemical properties of

2. L-75

L-75 is a colorless and transparent liquid with a special pungent odor. Its boiling point is high, the vapor pressure is low, and it is not volatile. L-75 soluble in water, can be miscible with a variety of organic solvents. In the presence of high temperature, open flame or oxidant, L-75 may decompose to produce toxic gases, so storage and transportation conditions need to be strictly controlled.
Safety storage specifications for
3. L-75

1. Storage facilities: The L-75 should be stored in a cool, ventilated, and dry special warehouse, away from open flames, heat sources and direct sunlight. The warehouse floor should be anti-skid and anti-leakage, and equipped with corresponding fire fighting equipment.
2. Storage container: The L-75 should be stored in a special sealed container. The container should have good corrosion resistance and sealing performance to prevent leakage. The container shall be inspected and maintained regularly to ensure that it is in good condition.
3. Storage limit: The storage of L-75 in the warehouse shall be strictly controlled and shall not exceed the specified limit. The storage area shall be provided with obvious safety warning signs and fire and explosion-proof facilities.
4. Personnel management: warehouse management personnel should be professionally trained and familiar with the physical and chemical properties of the L-75 and safe operation procedures. Personnel entering the warehouse should wear protective clothing, protective glasses and gloves and other personal protective equipment.

4. L-75 safety transport specification

1. transport vehicles: L-75 should use special dangerous goods transport vehicles for transport, vehicles should have good sealing, anti-collision and fire, explosion-proof performance. The condition of the vehicle should be checked before transportation to ensure safety and reliability.
2. transport personnel: transport personnel should be professionally trained, familiar with the physical and chemical properties of the L-75 and safe operation procedures. During transportation, vigilance should be maintained and measures should be taken in time when abnormal situations are found.
3. Transportation route: The transportation route should be smooth and smooth, and avoid passing through densely populated areas and sensitive environmental areas. During transportation, traffic rules should be observed to keep the speed stable.
4. Packaging and marking: The transport packaging of the L-75 shall comply with relevant standards and have good sealing and impact resistance. Information such as the identification of dangerous goods and precautions for transportation shall be clearly marked on the package.

5. emergency measures

1. Leakage treatment: when L-75 leakage is found, the leakage source should be cut off immediately, and the leakage should be covered with sand, dry lime and other adsorption materials, and then collected into a special container. In case of a large amount of leakage, it shall be reported to the local environmental protection department in time and corresponding measures shall be taken for disposal.
2. Fire treatment: in case of fire, immediately cut off the fire source and use foam, dry powder and other fire extinguishers to extinguish the fire. At the same time, should be timely alarm and start the emergency plan, organize personnel evacuation and rescue.

6. summary

L-75 as a common chemical production raw materials, its safe storage and transportation is very important. In order to ensure the safety of L-75 during production, storage and transportation, it is necessary to strictly abide by relevant specifications and standards, strengthen management and operator training, and improve safety awareness. By taking effective measures and means to reduce safety risks, to ensure the smooth progress of the production process and the safety of employees and the environment.