Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of isoprene rubber

[Chemical Knowledge]：Specification for storage and transport of isoprene rubber

Read： 961 Time：12months ago Source：Transform the World with Simplicity

Isoprene Rubber Safety Storage and Transportation Specification

1. Introduction

Isoprene rubber (Isoprene Rubber, referred to as IR) is an important chemical production raw material, widely used in tires, hose, tape, rubber shoes and other rubber products in the production. Due to its unique molecular structure and chemical properties, isoprene rubber needs to strictly abide by certain safety regulations during storage and transportation to ensure the safety of personnel and the environment. This paper will detail the specification of safe storage and transportation of isoprene rubber.

2. the physical and chemical properties of isoprene rubber

Isoprene rubber is a colorless or yellowish elastic solid with good heat resistance, cold resistance, ozone resistance and electrical insulation. However, it also has some dangerous physical and chemical properties, such as flammable, explosive, and toxic. Therefore, special attention is required during storage and transportation.

3. Isoprene Rubber Safety Storage Specification

1. The storage place should choose a cool, ventilated and dry place, away from fire, heat and direct sunlight.
2. The storage container shall be a special container with good sealing performance to avoid mixing with oxidants, acids, alkalis and other substances.
3. During storage, the tightness of the container and the quality of isoprene rubber should be checked regularly, and any abnormalities should be handled in time.
4. The storage site shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to deal with emergencies.
Safety transportation specifications for
4. isoprene rubber

1. Before transportation, check whether the packaging is intact to ensure that there is no leakage.
2. During transportation, it should be loaded and unloaded lightly to avoid severe vibration and friction to prevent packaging damage.
3. Transportation vehicles shall be provided with corresponding safety measures such as fire prevention, explosion prevention and anti-virus to ensure safety during transportation.
4. During transportation, high temperature, open flame and electrostatic spark shall be avoided, and mixed transportation with oxidants, acids, alkalis and other substances shall be prohibited.
5. During transportation, the condition of the goods should be checked regularly and any abnormality should be handled in time.

5. isoprene rubber leakage emergency treatment specification

1. found isoprene rubber leakage, should immediately stop the operation, close the source of leakage, to prevent the spread of leakage.
2. For a small amount of leakage, sand or other non-combustible adsorbent can be used for absorption and treatment. For large leaks, cofferdams should be used to contain them and then covered with foam to reduce their vapor hazards.
3. When cleaning up the leakage, wear protective gloves and protective clothing to avoid direct contact with the leakage.
4. In case of fire, immediately cut off the fire source and put out the fire with fire extinguishing equipment. When extinguishing fire, stand in the upwind direction to avoid inhaling harmful gases.

6. conclusion

isoprene rubber is an important raw material for chemical production, and its safe storage and transportation are very important. Through strict compliance with storage and transportation regulations, safety risks can be effectively reduced and the safety of personnel and the environment can be guaranteed. At the same time, for the leakage accident, emergency measures should be taken in time to reduce the loss and impact.

Previous： Specification for storage and transport of neoprene

Next： Specification for storage and transport of silicone rubber

News Categories