Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of CPE

[Chemical Knowledge]：Specification for storage and transportation of CPE

Read： 623 Time：15months ago Source：Transform the World with Simplicity

In the field of chemical production raw materials, CPE (chlorinated polyethylene) is a common plastic material, widely used in wire and cable, pipe, film and other fields. Due to its special chemical properties, CPE needs to comply with certain safety regulations during storage and transportation to ensure the safety of personnel and the environment. This paper will detail the safe storage and transportation specification of CPE.

1. the chemical properties of CPE

CPE is a polymer compound made of polyethylene by chlorination. It has excellent weather resistance, oil resistance, aging resistance and electrical insulation, so it is widely used in various fields. However, CPE is also toxic and corrosive, and may cause harm to humans and the environment.

2. CPE safety storage specification

1. Storage place selection: CPE should be stored in a dry, cool, well-ventilated indoor place, avoid direct sunlight and high temperature environment.
2. Storage container requirements: CPE should be stored in a special plastic or metal container, and the container should be well sealed to prevent dust and moisture from entering.
3. Storage and stacking requirements: CPE should be neatly stacked to avoid excessive or overcrowded stacking to prevent collapse or damage.
4. Storage identification requirements: the storage site should be set up with obvious warning signs, including chemical name, danger tips and other information.

3. CPE safety transport specification

1. Transport vehicle requirements: CPE should use special chemical transport vehicles for transport, vehicles should meet the relevant safety standards, with anti-leakage, fire prevention and other functions.
2. Requirements for transportation personnel: transportation personnel shall be professionally trained and have the safety knowledge and skills for chemical transportation.
3. Transport packaging requirements: CPE should be packaged in special bags or containers, and the packaging should be firm and sealed to prevent leakage and damage.
4. Transportation route planning: the transportation route should avoid sensitive areas such as densely populated areas and water source protection areas, and the route with good road conditions should be selected as far as possible.
Emergency treatment
for CPE leakage of
4.
During the storage and transportation of CPE, once a leakage accident occurs, the following emergency treatment measures should be taken:

1. Immediately cut off the leakage source and close the corresponding valve or container switch.
2. Use special adsorption materials or absorbents to clean up the leakage to avoid its diffusion into the environment.
3. Place the cleaned waste in a dedicated hazardous waste container and dispose of it in accordance with relevant regulations.
4. Ventilate the leakage area to ensure that the air quality meets the standard.
5. If the leakage enters the water source or sewer, the relevant department shall be notified immediately for disposal to avoid pollution to the water body.

In conclusion, in the field of chemical production raw materials, CPE's safe storage and transportation regulations are essential to ensure the safety of personnel and the environment. Relevant enterprises and individuals shall strictly abide by relevant regulations and standards to ensure the safe and controllable storage and transportation of CPE.

Previous： Specification for storage and transportation of BOPET

Next： Specification for storage and transportation of CPP

News Categories