Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of PBAT

[Chemical Knowledge]：Specification for storage and transportation of PBAT

Read： 443 Time：20months ago Source：Transform the World with Simplicity

PBAT is a biodegradable plastic. Due to its environmental protection characteristics and wide application, its use in the field of chemical production has gradually increased in recent years. In order to ensure the safety of PBAT during production, storage and transportation, a series of codes and standards need to be followed. The following is a recommendation for safe storage and transport of PBAT.

1. Overview

The purpose of this specification is to provide guidance for the safe operation of PBAT during production, storage and transportation to ensure the safety of employees and the environment.

2. storage specification

1. Storage facilities should be dry, ventilated, fire-proof, and have leak-proof, anti-seepage, anti-static and other functions.
2. The storage area shall be provided with obvious safety signs, including flammable and toxic warning signs.
3. Storage should be classified to avoid mixing with incompatible substances.
4. Check the storage facilities regularly to ensure that they are intact and prevent leakage accidents.

3. transport specifications

1. Transport vehicles should have the appropriate qualifications and certificates, the driver should have the relevant transport experience.
2. Check whether the packaging of the goods is intact before transportation to ensure that the goods will not leak during transportation.
3. During transportation, the road traffic safety regulations shall be observed, the speed shall be kept stable, and operations such as sudden braking shall be avoided.
4. Transportation vehicles shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.

4. safe operation specification

1. Operators should be professionally trained to understand the nature and safe operation procedures of PBAT.
2. Before operation, check whether the equipment is running normally to ensure that the process parameters meet the requirements.
3. During the operation, pay close attention to the operation status of the equipment, and take timely measures if any abnormal situation is found.
4. After the operation, the site should be cleaned to ensure that the equipment is clean and tidy.

5. emergency treatment specification

1. should formulate detailed emergency plan, including leakage, fire and other emergency treatment measures.
2. Conduct emergency drills on a regular basis to improve employees' ability to respond to emergencies.
3. Appropriate emergency handling equipment and equipment shall be provided to ensure that measures can be taken in time when emergencies occur.

6. environmental protection requirements

1. In the process of production and storage, effective measures should be taken to reduce the discharge of waste gas, waste water, waste residue and other pollutants.
2. The waste generated shall be properly disposed to avoid harm to the environment and personnel.
3. Green production technologies and circular economy models should be actively promoted to improve resource utilization efficiency.

7. supervision and assessment

1. A sound supervision system should be established to comprehensively supervise and manage the production, storage and transportation process of PBAT.
2. Conduct regular safety training and assessment for employees to ensure that employees understand and master relevant safety operation procedures.
3. Violations of this Code shall be dealt with seriously to ensure the effective implementation of the Code. Through the formulation and implementation of the above specifications,

can effectively ensure the safety of PBAT in the process of production, storage and transportation, and reduce potential risks and hazards. At the same time, it is also conducive to improving the environmental image and market competitiveness of enterprises.

Previous： Specification for storage and transportation of recycled PVC

Next： Specification for storage and transport of PLA

News Categories