Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of caustic soda

[Chemical Knowledge]：Specification for storage and transportation of caustic soda

Read： 673 Time：13months ago Source：Transform the World with Simplicity

safe storage and transportation specification
of caustic soda
1. introduction

caustic soda, also known as sodium hydroxide, is a strong alkaline inorganic compounds, widely used in the field of chemical production of raw materials. However, due to its strong corrosiveness and irritation, caustic soda has certain safety risks during storage and transportation. In order to ensure the safety of staff and the smooth progress of production, it is very important to formulate strict storage and transportation specifications for caustic soda.

2. the physical and chemical properties of caustic soda

caustic soda is a white solid with strong hygroscopicity and can quickly absorb moisture in the air. In addition, caustic soda is highly corrosive and can react with many substances to generate a large amount of heat. Therefore, during storage and transportation, special attention must be paid to prevent contact between caustic soda and moisture and other substances.

3. caustic soda storage specification

1. the choice of storage place: caustic soda should be stored in a dry, ventilated, cool special warehouse, avoid direct sunlight and high temperature.
2. Selection of storage container: A special sealed container should be used to store caustic soda to ensure that the container has good corrosion resistance and can effectively prevent leakage.
3. Control of storage environment: The warehouse should be kept dry and the relative humidity should be controlled below 60% to avoid caustic soda moisture absorption.
4. Setting of storage identification: Obvious warning identification shall be set up in the warehouse to indicate the dangerous nature of caustic soda and emergency measures.

4. caustic soda transportation specifications

1. Selection of transportation vehicles: Special transportation vehicles with corrosion resistance should be selected for caustic soda transportation to ensure that the vehicles are in good condition.
2. Protection during transportation: During transportation, caustic soda should be strictly protected to avoid contact with moisture and other substances.
3. Transport personnel training: transport personnel should receive relevant safety training to understand the nature of caustic soda and emergency treatment measures.
4. Planning of transportation routes: Transportation routes should be reasonably planned to avoid passing through densely populated areas and sensitive environments.

5. emergency treatment measures

1. skin contact: if the skin comes into contact with caustic soda, rinse with plenty of water immediately, and then seek medical assistance.
2. Eye contact: If your eyes come into contact with caustic soda, immediately flush your eyes with plenty of water and seek medical attention.
3. Inhalation: If caustic soda dust or vapor is inhaled, immediately move the patient to a well-ventilated place to keep the respiratory tract unobstructed, and then seek medical assistance.
4. Leakage treatment: If caustic soda leakage occurs, immediately take measures to prevent the leakage from spreading, absorb the leakage with sand, dry lime, etc., and then clean it up.

6. conclusion

caustic soda is an important raw material for chemical production, and its safe storage and transportation are very important. By understanding the physical and chemical properties of caustic soda, strictly abiding by the storage and transportation specifications, and taking effective protective measures and emergency treatment measures, the safety risks of caustic soda in the storage and transportation process can be greatly reduced, and the safety of staff and the smooth progress of production can be guaranteed.

Previous： Specification for storage and transportation of soap particles

Next： Specification for storage and transportation of soda ash

News Categories