Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of light cycle oil

[Chemical Knowledge]：Specification for storage and transportation of light cycle oil

Read： 560 Time：13months ago Source：Transform the World with Simplicity

Light cycle oil (LCO) is a common raw material for chemical production, which is widely used in petroleum refining, chemical industry, energy and other fields. Because of its flammable, explosive, toxic and other characteristics, it is necessary to strictly abide by relevant safety regulations during storage and transportation to ensure the safety of personnel and the environment. This article will detail the safety storage and transportation specifications of light cycle oil.

1. the physical and chemical properties of light cycle oil

light cycle oil is a light oil, the main component of hydrocarbons, with high flash point, ignition point and vapor pressure. Its physical properties include color, density, viscosity, etc., and its chemical properties include acidity, alkalinity, sulfur content, etc. These properties have an important impact on the storage and transportation of light cycle oil. The risk assessment of

2. light circulating oil

light circulating oil is flammable, explosive, toxic and other dangerous, once leakage or combustion occurs, it will cause serious harm to personnel and the environment. Therefore, before storage and transportation, it is necessary to evaluate the risk of light cycle oil and formulate corresponding safety measures.

of storage specifications for
3. light circulating oil
1. The storage place should be in a well-ventilated, dry and cool place, away from fire sources, heat sources and open flames.
2. The storage container shall comply with the relevant standards and have sufficient strength and tightness to prevent leakage and volatilization.
3. Fire fighting equipment and leakage emergency treatment equipment shall be set in the storage area to ensure safety and reliability.
4. Periodic inspection and maintenance shall be carried out during storage to ensure the integrity of containers and pipes.

4. the transportation specifications of light circulating oil

1. The transportation vehicle should meet relevant standards and have sufficient strength and sealing to prevent leakage and volatilization.
2. During transportation, traffic rules should be observed, the speed should be kept stable, and operations such as sudden braking and sharp turns should be avoided.
3. Transportation vehicles shall be equipped with fire fighting equipment and leakage emergency treatment equipment to ensure safety and reliability.
4. During transportation, regular inspection and maintenance should be carried out to ensure that the vehicles and containers are in good condition.

5. light circulating oil leakage emergency treatment specification

1. found after the leakage should immediately stop the operation, close the valve, cut off the leakage source.
2. Use special equipment to recycle the leakage to avoid environmental pollution.
3. For the leakage that cannot be recovered, non-combustible adsorption materials should be used for treatment to avoid fire accidents.
4. In the process of handling, relevant safety operation regulations shall be observed to ensure the safety of personnel.

6. the safety management of light circulating oil

1. A sound safety management system and operating procedures should be established, and the responsibilities and authorities of management personnel at all levels should be clarified.
2. The safety education and training of employees should be strengthened to improve their safety awareness and operation skills.
3. Regular safety inspection and evaluation shall be carried out to discover and rectify potential safety hazards in time.
4. Emergency plans and response mechanisms shall be established to ensure that measures can be taken in a timely manner in case of emergency to ensure the safety of personnel and the environment.

In short, the safe storage and transportation of light circulating oil needs to strictly abide by relevant specifications and standards, strengthen safety management, and ensure the safety of personnel and the environment. At the same time, enterprises need to strengthen the safety education and training of employees, improve the safety awareness and operation skills of employees, and provide a strong guarantee for the safety production of enterprises.

Previous： Specification for storage and transportation of coal-to-naphtha

Next： Specification for storage and transportation of coal-to-olefins

News Categories