Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of C4 after ether

[Chemical Knowledge]：Specification for storage and transport of C4 after ether

Read： 768 Time：12months ago Source：Transform the World with Simplicity

1. of safe storage and transportation specification
of ether C4 Introduction

Ether C4 is an important raw material for chemical production, which is widely used in fine chemical industry, medicine, pesticide and other fields. Because of its flammable, explosive, toxic and other characteristics, it is necessary to strictly abide by relevant safety regulations during storage and transportation to ensure the safety of personnel and the environment. The purpose of this paper is to discuss the safety storage and transportation specifications of C4 after ether, and to provide reference for relevant practitioners.

the physicochemical properties of C4 after the 2. of ether
after the
of ether C4 is a colorless, transparent, flammable, explosive liquid, with ether-specific odor. Its main components are butene, butane, isobutene and other hydrocarbons, but also contain a small amount of water and acidic impurities. The flash point of C4 after ether is low, easy to burn, and the burning speed is fast, and the flame temperature is high.

after the 3. of ether C4 safety storage specification

1. Storage place should be selected in a well-ventilated, far away from the fire source, heat source place, prohibit mixing with oxidant, acid and alkali substances.
2. The storage tank shall be a special tank that meets the safety requirements, and the tank body shall be inspected and maintained regularly to ensure that there is no leakage.
3. Fire fighting equipment and leakage emergency treatment equipment shall be set up in the storage site, and regular inspection and maintenance shall be carried out to ensure the effectiveness of the equipment.
4. During storage, the liquid level in the tank should be controlled to avoid too high or too low to prevent overflow or evacuation.
5. Safety warning signs shall be set up in the storage place, and personnel training shall be strengthened to improve the safety awareness and operation skills of employees.
Safety transportation specifications for C4 after
4. ether

1. Transportation vehicles should meet relevant safety requirements, be equipped with fire-fighting equipment and leakage emergency treatment equipment, and be inspected and maintained regularly.
2. During transportation, the vehicle speed should be controlled to avoid sudden braking and sharp turns to prevent the bump and leakage of goods.
3. During transportation, the tank should be kept well sealed to prevent air from entering or cargo leakage.
4. During transportation, high temperature and open fire environment should be avoided to prevent the goods from burning or exploding.
5. In the process of transportation, personnel training should be strengthened to improve the safety awareness and operation skills of drivers and supercargo.

after the 5. of ether C4 leakage emergency treatment specification

1. found after the leak should immediately stop the operation, close the corresponding valve, cut off the source of leakage.
2. Use special equipment to recover the leakage to avoid diffusion and environmental pollution.
3. If the leakage cannot be recovered, cover the leakage area with sand, dry lime and other adsorption materials, and clean it with detergent.
4. Ventilation should be strengthened during the treatment to avoid harmful gases generated by volatilization of leaked materials causing harm to personnel.
5. After the treatment, the leakage area shall be inspected, and the operation can be resumed only after confirming that there is no potential safety hazard.

6. conclusion

ether C4 as an important raw material for chemical production, its safe storage and transportation is very important. Relevant enterprises should strictly abide by relevant safety regulations, strengthen personnel training, improve employees' safety awareness and operation skills, and ensure that the storage and transportation process of C4 after ether is safe and controllable. At the same time, a sound emergency plan system should be established to respond quickly and take effective emergency measures in the event of leakage and other safety accidents to minimize losses and impacts.

Previous： Specification for storage and transportation of mixed C4

Next： Standard for storage and transportation of solvent oil

News Categories