Current Location： Home > News > Chemical Knowledge > Specification for storage mode and transportation of propylene feed gas

[Chemical Knowledge]：Specification for storage mode and transportation of propylene feed gas

Read： 658 Time：12months ago Source：Transform the World with Simplicity

The safety storage and transportation specification
of propylene feed gas
1. Introduction

Propylene feed gas is an important raw material for chemical production, widely used in plastics, synthetic rubber, synthetic fiber and other fields. However, propylene feed gas is a flammable and explosive gas, once stored and transported improperly, it is easy to cause safety accidents. Therefore, in order to ensure the safe storage and transportation of propylene feed gas, it is very important to formulate a set of strict specifications and standards.

2. the physical and chemical properties of propylene feed gas

propylene feed gas is a colorless, flammable, toxic gas with a pungent odor. It is denser than air and can be liquefied at lower pressures. Propylene feed gas combustion in the air will produce high temperature flame, if the mixing ratio is appropriate, the explosion risk is great.

3. safety storage specifications for propylene feed gas

1. Storage facilities should be built in a well-ventilated place away from fire, heat and power sources. The storage facilities shall be equipped with lightning protection and anti-static facilities, and shall be regularly maintained and tested.
2. The storage facilities shall be provided with a gas concentration alarm device. Once the concentration exceeds the standard, the ventilation equipment shall be started immediately and the alarm shall be given.
3. Storage facilities should be regularly inspected and maintained to ensure that the equipment is intact and prevent gas leakage.
4. The storage area shall be provided with obvious safety warning signs, and fireworks and open fire operations are prohibited.

4. propylene raw material gas transport specification

1. transport vehicles should comply with the relevant standards, with fire prevention, explosion-proof, anti-static and other safety facilities. During transportation, the vehicle speed shall be kept stable, and sudden braking and other operations shall be avoided.
2. During transportation, the state of the goods should be checked regularly to ensure that the gas does not leak. Once a gas leak is found, measures should be taken immediately and reported to the relevant departments.
3. The transport vehicles shall be equipped with professional drivers and supercargo, who have received relevant training and obtained qualification certificates. The driver and supercargo shall understand the nature and transportation requirements of propylene feed gas and master the skills to deal with emergencies.
4. During transportation, relevant laws and regulations shall be followed, and road traffic rules shall be observed to ensure transportation safety.

5. emergency treatment measures

1. In the event of a leakage accident during storage and transportation, the emergency plan should be activated immediately and professionals should be organized to deal with it.
2. The personnel near the leakage area should be evacuated quickly, and a cordon should be set up to prohibit irrelevant personnel from entering.
3. Use professional gas detection equipment to determine the leakage area and take effective measures to stop the leakage.
4. Ventilate the leakage area to avoid explosion or poisoning caused by gas accumulation.

6. training and management

1. Conduct regular training for the staff engaged in the storage and transportation of propylene raw material gas to improve their safety awareness and operation skills.
2. Establish a sound safety management system and operating procedures, and clarify various safety requirements and operating procedures.
3. Regularly inspect and maintain storage and transportation facilities to ensure that the equipment is in good working condition.

7. conclusion

safety of propylene raw material gas storage and transportation specification is very important to ensure the safety of chemical production raw materials. Through strict implementation of norms and standards, strengthening management and training, we can effectively reduce the probability of safety accidents and ensure the safety of people's lives and property. All relevant units and individuals shall be fully aware of the danger of propylene feed gas, strictly abide by relevant regulations and standards, and jointly maintain social safety and stability.

Previous： Propane storage and transport specifications

Next： Specification for storage and transportation of mixed C4

News Categories