Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of resins

[Chemical Knowledge]：Specification for storage and transport of resins

Read： 787 Time：14months ago Source：Transform the World with Simplicity

Resins in the field of chemical production raw materials have strict safety requirements for storage and transportation due to their unique physical and chemical properties. This article will elaborate on the specifications of the resin in these processes to ensure its safe and effective storage and transportation. The properties of

1. resin

resin is usually a mixture of polymer compounds, which has good corrosion resistance, thermal stability, electrical insulation and other properties, so it is widely used in chemical industry, electronics, building materials and other fields. However, during the storage and transportation of the resin, it may be affected by environmental factors such as temperature, humidity, and light, which may cause changes in its properties and even cause safety accidents.

2. safety storage specification

1. storage facilities: resin should be stored in a dry, ventilated, sunscreen special warehouse, avoid contact with open flame, heat source. Temperature and humidity monitoring devices shall be set in the warehouse to ensure that the storage environment meets the requirements.
2. Storage container: The resin should be stored in a special sealed container to prevent it from reacting with other substances or contaminating. Vessels should be cleaned and maintained regularly to ensure that they are intact.
3. Storage and stacking: The resin should be stored according to the specified stacking height and spacing to avoid excessive accumulation and pressure deformation of the bottom resin. At the same time, different types of resin should be classified and stored to prevent confusion.

3. safety transport specification

1. transport vehicles: resin should be used for special tankers or trucks for transport, the vehicle should have good sealing performance and sun protection measures to prevent the resin in the transport process by the impact of environmental factors.
2. Transport personnel: transport personnel should be professionally trained to understand the nature of the resin and transport safety knowledge, with the ability to respond to emergencies.
3. Transportation route: The transportation route should be smooth and unblocked to avoid transportation in bad weather or traffic congestion.

4. emergency treatment measures

in the process of storage and transportation of resin, such as leakage, fire and other emergencies, should take the following emergency treatment measures:

1. Leakage treatment: in case of resin leakage, should immediately stop the operation, use special tools and equipment to clean up the leakage, to avoid environmental pollution. At the same time, the leakage area should be ventilated to eliminate potential safety hazards.
2. Fire treatment: If a fire occurs, call the police immediately and use a fire extinguisher to extinguish the fire. If the fire is large, evacuate the scene quickly and wait for the fire personnel to rescue. During the fire fighting, the safety of personnel and equipment on site shall be protected.

5. summary and recommendations

resin as an important material in the field of chemical production raw materials, its safe storage and transportation is very important. In order to ensure the safety of the resin in these processes, the following measures should be taken:

1. Strengthen the understanding of the nature of the resin and master the safety requirements for its storage and transportation;
2. Regularly inspect and maintain the storage and transportation facilities to ensure It meets safety standards;
3. Provide professional training to staff to improve their safety awareness and ability to respond to emergencies;
4. Establish a sound safety management system and emergency plan to ensure that measures can be taken in time in case of emergency to ensure the safety of personnel and property.

through the implementation of the above measures, can effectively protect the resin in the field of chemical production of raw materials in the safe storage and transportation, for the stable production and development of enterprises to provide a strong guarantee.

Previous： Specification for storage and transport of TPU

Next： Specification for storage and transportation of potash fertilizer

News Categories