Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of reclaimed rubber

[Chemical Knowledge]：Specification for storage and transport of reclaimed rubber

Read： 649 Time：14months ago Source：Transform the World with Simplicity

The safety storage and transportation specification
of recycled rubber
1. Introduction

With the expansion of chemical production scale and the continuous development of technology, recycled rubber, as an important chemical production raw material, is more and more widely used in industrial production. However, there are certain safety hazards in the storage and transportation of recycled rubber. If the operation is not standardized, it may cause fire, explosion, poisoning and other accidents. Therefore, this article aims to explore the safety storage and transportation specifications of recycled rubber to ensure production safety.

2. properties and risk analysis of recycled rubber

recycled rubber is made of waste rubber after crushing, desulfurization, plasticizing and other processes, with high elasticity, wear resistance and anti-aging performance. However, the recycled rubber is also flammable, explosive, toxic chemicals, the main risk performance in the following aspects:

1. Flammability: Recycled rubber ignition point is low, in case of fire or high temperature surface easy to cause fire.

2. Explosion: Recycled rubber contains certain volatiles, such as hydrogen sulfide, sulfur dioxide, etc., these gases will explode at a certain concentration and temperature.

3. Toxicity: Recycled rubber may add some toxic chemicals in the production process, such as accelerators, antioxidants, etc. These substances have certain hazards to the human body.

3. safety storage specification of recycled rubber

in order to ensure the storage safety of recycled rubber, the following measures need to be taken:

1. The storage place should choose a dry, ventilated and sun-protected place to avoid contact with open flames and high-temperature surfaces.

2. The storage site shall be equipped with fire fighting equipment and leakage emergency treatment equipment to deal with emergencies.

3. Storage should be classified storage, clear identification, to avoid different types of recycled rubber mixed to cause chemical reactions.

4. Regularly check the safety of the storage site, and discover and deal with potential safety hazards in time.

4. safety of recycled rubber transport specification

in order to ensure the safety of recycled rubber transport, the following measures need to be taken:

1. transport vehicles should meet the relevant standards, with fire, explosion, leakage and other safety facilities.

2. Before transportation, check whether the packaging of recycled rubber is intact to prevent leakage during transportation.

3. Avoid violent vibration and friction during transportation to prevent the recycled rubber from catching fire or exploding.

4. Transport vehicles shall be equipped with fire fighting equipment and leakage emergency treatment equipment to deal with emergencies.

5. During transportation, traffic rules should be observed, speed stability should be maintained, and behaviors such as speeding and sudden braking should be avoided.

5. the safety of recycled rubber storage and transportation management requirements

in order to ensure the safety of recycled rubber storage and transportation, but also need to take the following management measures:

1. establish a sound recycled rubber storage and transportation management system, clear the safety regulations and operating procedures.

2. Provide professional training for storage and transportation personnel to improve their safety awareness and operation skills.

3. Regularly inspect and maintain storage and transportation facilities to ensure their normal operation and safety.

4. Establish an emergency plan, clarify the process and measures to deal with emergencies, and ensure that accidents can be handled and controlled in time.

6. conclusion

recycled rubber as an important raw material for chemical production, there are certain security risks in the process of storage and transportation. In order to ensure production safety, it is necessary to take corresponding safety measures and management measures to ensure that the storage and transportation process of recycled rubber meets relevant specifications and requirements. At the same time, it is also necessary to strengthen supervision and inspection, discover and deal with potential safety hazards in time, and ensure the safe and stable operation of chemical production.

Previous： Specification for storage and transportation of rubber accessories

Next： Specification for storage and transport of silicones

News Categories