[Chemical Knowledge]：Specification for storage and transport of synthetic rubber for general use

General-purpose synthetic rubber is widely used in the field of chemical production raw materials. However, due to its special physical and chemical properties, it is very important to ensure its safe storage and transportation. This article will detail the safety storage and transportation specifications of general synthetic rubber to ensure safety and efficiency in the production process.

1. the nature of general-purpose synthetic rubber

general-purpose synthetic rubber is a synthetic polymer compound, with good elasticity, wear resistance, oil resistance, chemical resistance and other characteristics. However, these properties also determine the safety risks that general-purpose synthetic rubber may face during storage and transportation. Therefore, an understanding of the properties of general purpose synthetic rubbers is essential for the development of suitable storage and transportation specifications.

2. safety storage specification

1. storage facilities requirements: general synthetic rubber should be stored in a dry, ventilated, fireproof special warehouse, avoid direct sunlight and high temperature environment. The warehouse floor should be flat, non-slip, and have a good drainage system.
2. Storage and stacking requirements: General-purpose synthetic rubber should be stacked according to varieties and specifications. The stacking height should be determined according to product characteristics and warehouse conditions, and should not exceed the specified height limit. Proper passages shall be maintained between the stacks to facilitate handling and inspection.
3. Storage term management: General purpose synthetic rubber shall be stored according to the specified period, and products exceeding the storage term shall be rechecked and confirmed to be qualified before they can continue to be used.
4. Fire-fighting facilities: The warehouse shall be equipped with complete fire-fighting facilities, including fire extinguishers, fire hydrants, smoke alarms, etc., and fire-fighting drills shall be conducted regularly to ensure safety.

3. Safety Transport Specification

1. Transport Vehicle Requirements: General-purpose synthetic rubber should be transported by special transport vehicles, which should have fire prevention, explosion prevention, anti-skid and other functions, and maintain good vehicle conditions.
2. Requirements for transportation personnel: transportation personnel should be professionally trained, familiar with the nature of general synthetic rubber and safe operation procedures, and have the ability to respond to emergencies.
3. Safety protection during transportation: During transportation, the general-purpose synthetic rubber should be stably stacked to avoid sliding and dumping. At the same time, measures should be taken to prevent the product from being affected by direct sunlight and high temperature environment.
4. Selection of transportation route: A smooth and unblocked transportation route should be selected to avoid driving on rugged or poor roads. At the same time, we should try to avoid passing in densely populated areas or near important facilities.

4. emergency plan

In order to ensure the safety of general-purpose synthetic rubber during storage and transportation, a complete emergency plan should be formulated. The emergency plan shall include the following contents:

1. Organization and responsibilities: clarify the organization and responsibilities of each member of the emergency plan to ensure the coordination and smoothness of emergency response.
2. Early warning and reporting: Establish an early warning mechanism to detect potential security risks in a timely manner and report them in accordance with prescribed procedures.
3. Emergency response procedures: specify emergency response procedures in detail, including accident discovery, alarm, evacuation, rescue and other links.
4. Training and drills: conduct training on the emergency plan, improve the emergency response ability of relevant personnel, and conduct regular drills to ensure the effectiveness of the plan.

In short, the safety storage and transportation regulations of general-purpose synthetic rubber in the field of chemical production raw materials are of great significance to ensure the safety and efficiency of the production process. By strictly abiding by the storage and transportation specifications, formulating perfect emergency plans, and strengthening the training and management of relevant personnel, the safety risks of general synthetic rubber in the storage and transportation process can be effectively reduced, and a strong guarantee for the stable production of enterprises can be provided.