Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of plastic products

[Chemical Knowledge]：Specification for storage and transport of plastic products

Read： 1037 Time：18months ago Source：Transform the World with Simplicity

In the field of raw materials for chemical production, the safe storage and transportation specifications
of plastic products
1. Introduction

With the rapid development of the chemical industry, plastic products, as an important raw material for production, have been widely used in various fields. However, due to the special nature of plastic products, there are certain security risks in the process of storage and transportation. In order to ensure the safe storage and transportation of plastic products, this article will discuss the relevant specifications and recommendations.

2. safety storage specifications for plastic products

1. Storage environment requirements: Plastic products should be stored in a dry, ventilated place to avoid direct sunlight, avoid high temperature environment, and prevent deformation and aging.
2. Classified storage: Different types of plastic products should be classified and stored to avoid mutual mixing and pollution.
3. Stacking height: The stacking height of plastic products should be determined according to the product characteristics and the conditions of storage facilities to avoid pressure deformation of the bottom product due to excessive stacking.
4. fire prevention measures: plastic products storage area should be set up the corresponding fire equipment and fire prevention measures, no fireworks.

3. plastic products safety transport specification

1 packaging requirements: plastic products in the transport process should take appropriate packaging measures to prevent damage caused by friction, collision, etc. The packaging should be firm and sealed to prevent the product from falling off or leaking during transportation.
2. Requirements for transportation vehicles: Vehicles transporting plastic products should have corresponding protective measures, such as sun protection and rain protection. At the same time, the vehicle should be kept clean and avoid mixing with harmful substances.
3. Precautions during transportation: During transportation, you should abide by traffic rules, keep the speed stable, and avoid sudden braking to reduce the impact on plastic products. At the same time, it should be ensured that the product will not slide or roll during transportation to avoid damage.

4. Case Analysis
A chemical enterprise in
in the production of raw materials storage and transportation process, due to not strictly abide by the safety of plastic products storage and transportation norms, resulting in part of the product damage, affecting the production schedule and product quality. After investigation and analysis, the following problems were found:

1. The storage environment does not meet the requirements: plastic products are stored in a humid and dark place, causing the product to be damp and deformed.
2. The stacking height is too high: Due to the high stacking height, the bottom product is deformed under pressure.
3. Improper packaging measures: Some plastic products are damaged during transportation, and the products are damaged by friction and collision.

In response to the above problems, the company has taken the following improvement measures:

1. Improve the storage environment: Store plastic products in a dry, ventilated place to avoid direct sunlight.
2. Reduce the stacking height: according to different product characteristics and storage facilities conditions, reduce the stacking height of plastic products.
3. Strengthen packaging measures: stronger and sealed packaging of plastic products to ensure that the products will not be damaged during transportation.

Through the implementation of the above improvement measures, the storage and transportation safety of plastic products has been significantly improved, product losses have been reduced, and production efficiency has been improved.

5. Conclusion

In the field of chemical production raw materials, the safety storage and transportation of plastic products is of great significance to ensure product quality and production efficiency. By strictly complying with storage and transportation specifications, product losses and safety accidents can be effectively reduced, and stable production of enterprises can be guaranteed. Therefore, chemical companies should strengthen the training and management of plastic products storage and transportation specifications to ensure the implementation of relevant regulations.

Previous： Specification for storage and transportation of plastic pipes

Next： Specification for storage and transport of natural rubber

News Categories