Current Location： Home > News > Chemical Knowledge > Manufacturing method and process of antistatic agent

[Chemical Knowledge]：Manufacturing method and process of antistatic agent

Read： 430 Time：14months ago Source：Transform the World with Simplicity

The manufacturing method
of antistatic agent
1. Introduction

In the field of chemical production raw materials, antistatic agent is widely used. Antistatic agents can reduce or eliminate the generation and accumulation of static charges, thereby preventing electrostatic hazards. This article will introduce a manufacturing method of antistatic agent, aiming to provide an effective electrostatic protection scheme.

2. Materials and Equipment

1. Materials: The main components of antistatic agents include hydrophilic polymers, ionic surfactants, etc.
2. Equipment: reaction kettle, stirrer, thermometer, pH meter, centrifuge, etc.

3. manufacturing steps

1. ingredients: according to the predetermined formula ratio, the hydrophilic polymer, ionic surfactant and other raw materials are ready.
2. Stirring and mixing: Add the ingredients to the reaction kettle and turn on the stirrer to fully mix the raw materials.
3. pH adjustment: The pH of the mixture is adjusted to a predetermined range with an acid or a base.
4. Heating reaction: heating the reaction kettle, so that the mixture at a certain temperature for a certain period of time.
5. Cooling Centrifugation: After completion of the reaction, the mixture was cooled to room temperature, and then the antistatic agent product was separated using a centrifuge.
6. Washing and drying: The antistatic agent product is washed with an appropriate amount of water and then dried to obtain the final antistatic agent.
Precautions for
4.

1. In the manufacturing process, the proportion of each raw material and the feeding sequence should be strictly controlled to ensure product quality.
2. The stirring speed and time should be adjusted according to the equipment and the nature of the raw materials to ensure that the mixture is uniform.
3. When adjusting the pH value, attention should be paid to the control of pH to avoid excessive adjustment.
4. During the heating reaction, the reaction temperature and time should be controlled to avoid product decomposition or deterioration.
5. When centrifuging, the appropriate centrifugal speed and time should be selected according to the nature of the product and the equipment.

5. Application and Prospect

The antistatic agent obtained by the manufacturing method has a wide range of application prospects in the field of chemical production raw materials, which can improve the anti-static performance of the product and prevent various problems caused by static electricity. With the continuous progress of science and technology, the performance requirements of antistatic agents are also increasing, so it is necessary to further optimize the manufacturing method and improve the performance and quality of antistatic agents. At the same time, with the continuous improvement of environmental awareness, the environmental protection requirements of antistatic agents are also increasing, so it is necessary to develop environmentally friendly antistatic agents to meet market demand. In the future, the antistatic agent market will be further expanded, and the application field will continue to expand.

6. Conclusion

This paper introduces a manufacturing method of antistatic agent, which is easy to operate, easy to obtain raw materials, and the product has good anti-static performance. By strictly controlling the process parameters of each manufacturing step, high quality antistatic agent products can be obtained. In this paper, the application prospect of antistatic agent is prospected, and the suggestion of optimizing manufacturing method and developing environment-friendly antistatic agent is put forward.

Previous： Production method and process of polyisocyanate

Next： Production and manufacturing method and process of dioctyl phthalate (DOP)

News Categories