Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Dispersant production and manufacturing methods and processes.

[Chemical Knowledge]：Dispersant production and manufacturing methods and processes.

Read： 793 Time：15months ago Source：Transform the World with Simplicity

In the field of chemical production raw materials, the role of dispersant is very important, it can improve the stability of the material, prevent agglomeration and precipitation, so as to improve the performance of the product. The following is a method of manufacturing a dispersant.

1. materials and equipment

1. Main raw materials: acrylic acid, methyl methacrylate, styrene, butyl acrylate, etc.
2. Auxiliary raw materials: emulsifier, initiator, crosslinking agent, etc.
3. Equipment: reaction kettle, stirrer, thermometer, dripping device, etc.

2. Manufacturing Steps

1. Ingredients: Acrylic acid, methyl methacrylate, styrene, butyl acrylate and other main raw materials and emulsifier, initiator, crosslinking agent and other auxiliary raw materials are prepared according to the predetermined formula.
2. Emulsification: Add the main raw materials and emulsifier into the reaction kettle and stir evenly to form a pre-emulsion.
3. Polymerization: An initiator is added to the pre-emulsion, and the temperature is raised to a predetermined temperature to allow the monomer to undergo a free radical polymerization reaction to generate a polymer.
4. Post-treatment: After the polymerization reaction is completed, cool down, add dispersant and stabilizer, and stir evenly. Then, post-treatment steps such as filtration, washing and drying are carried out to obtain a dispersant product.
Precautions for
3.

1. Strictly control the reaction temperature and time to prevent unstable product performance.
2. Ensure that the equipment is clean and prevent impurities from entering the product.
3. Pay attention to safety during operation and avoid direct contact with initiators and other harmful substances.

4. performance testing
After the
is manufactured, it is necessary to test the performance of the dispersant, including dispersion, stability, viscosity and other indicators to ensure that the product meets the predetermined performance indicators.

above is a basic dispersant manufacturing method, and the specific steps may vary depending on the product type and equipment. In the actual production process, the manufacturing method needs to be optimized and adjusted according to the specific situation.

Previous： Manufacturing method and process flow of phenolic resin for foaming and heat preservation

Next： Production method and process flow of high purity dimethyl carbonate

News Categories