Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > HMA manufacturing methods and processes.

[Chemical Knowledge]：HMA manufacturing methods and processes.

Read： 762 Time：12months ago Source：Transform the World with Simplicity

HMA (hydrogenated methacrylate) is an important raw material for chemical production, which is widely used in adhesives, coatings, inks and other fields. A manufacturing method of the HMA will be described below.

1. raw material preparation

1. Methyl methacrylate (MMA): purity ≥ 99.5%
2. Hydrogen: purity ≥ 99.9%
3. Catalyst: generally platinum catalyst

2. equipment preparation

1. High pressure reactor: used for hydrogenation reaction
2. Stirring device: used to ensure uniform reaction
3. Temperature control device: used to control the reaction temperature
4. Pressure control device: used to control the reaction pressure

3. manufacturing steps

1. Add methyl methacrylate (MMA) into the high-pressure reactor and maintain a certain temperature and pressure.
2. Hydrogen was introduced and the catalyst was added to start the hydrogenation reaction.
3. Control the reaction temperature and pressure, maintain a certain reaction time, so that the reaction is fully carried out.
4. After completion of the reaction, post-treatment is carried out, including cooling, separation, purification and other steps to obtain pure HMA product.
Precautions for
4.

1. The selection and use of catalysts should be carried out in strict accordance with relevant regulations and operating requirements to ensure safety and catalytic effects.
2. The reaction temperature and pressure should be controlled accurately to avoid side reactions and safety accidents.
3. Pay attention to the purity and quality of the product during the post-processing process to ensure the performance of the product.

In short, the manufacturing of HMA requires strict control of raw materials, equipment and manufacturing processes to ensure product quality and safety. At the same time, the production process should meet the relevant requirements of environmental protection and safety production, and promote the sustainable development of the chemical industry.

Previous： Manufacturing method and process of CASE polyether polyol

Next： PA manufacturing methods and processes

News Categories