Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Production and manufacturing method and process flow of m-methyl anisole

[Chemical Knowledge]：Production and manufacturing method and process flow of m-methyl anisole

Read： 790 Time：12months ago Source：Transform the World with Simplicity

The manufacturing method
of methyl anisole
1. Introduction

methyl anisole (m-Methylanisole) is a common chemical production raw material, widely used in medicine, pesticides, spices and other fields. This paper will introduce the manufacturing method of methyl anisole, including its raw materials, reaction principle, production process and operation steps.

2. Raw Materials and Reaction Principle

The manufacture of m-methyl anisole mainly requires the following raw materials: m-cresol and methanol. Among them, m-cresol is a compound with a methyl group and a hydroxyl group on the benzene ring, and methanol is a simple alcohol. The principle of

reaction is that m-cresol and methanol are etherified under the action of acidic catalyst to produce m-methyl anisole and water. This reaction is a substitution reaction, I .e. the hydroxyl group in methanol replaces the hydroxyl group in m-cresol.

3. production process and operation steps

m-methyl anisole production process mainly includes the following steps:

1. ingredients: quantitative m-cresol and methanol into the reaction kettle, while adding the right amount of acid catalyst.
2. heating reaction: open the reaction kettle heating device, control the reaction temperature in the appropriate range, so that the full reaction of raw materials.
3. Separation and purification: After the reaction, the reaction solution was separated to obtain crude m-methyl anisole. Then, purification is carried out by operations such as distillation and washing to obtain a m-methyl anisole product having a relatively high purity.
4. Packaging and storage: The prepared m-methyl anisole products are packaged and stored in a cool, dry and ventilated warehouse.
Precautions for
4.

In the production process, the following matters need to be paid attention to:

1. Strictly control the reaction temperature to avoid too high or too low temperature affecting the reaction effect and product quality.
2. Adjust the ratio of raw materials and the amount of catalyst according to the actual situation to ensure the smooth progress of the reaction and the purity of the product.
3. In the process of separation and purification, ensure that the equipment is clean and the operation is standardized to avoid the introduction of impurities or product loss.
4. Operators should be professionally trained and familiar with the production process and equipment operation to ensure the safety and smoothness of the production process.

5. conclusion The manufacturing method of

m-methyl anisole involves the steps of batching, heating reaction, separation and purification. By controlling the reaction conditions, adjusting the ratio of raw materials and the amount of catalyst, high purity m-methyl anisole products can be obtained. In the production process, it is necessary to pay attention to temperature control, equipment operation specifications, etc., to ensure product quality and production safety.

Previous： Production and manufacturing method and process flow of p-methyl anisole

Next： Production and manufacturing method and process flow of dimethoxybenzene

News Categories