Welcome to the CHEMWIN

customer service

Help Center :

FAQ Reference Guide

Customer Service :

Trading Time : 09:30-17:00 GMT+8

Customer Service line : +86 400-9692-206

(09:30-18:00 GMT+8)

Inquire Now
All Categories

[Chemical Knowledge]:Production and manufacturing method and process flow of talcum powder

Talcum powder manufacturing method

1. Introduction

Talcum powder is a kind of non-metallic mineral powder widely used in the field of chemical production raw materials, with high whiteness, high purity, high chemical inertness, low thermal conductivity, high covering power and other excellent characteristics, so it is widely used in plastics, coatings, ceramics, paper, medicine, cosmetics and other fields. This article will introduce the manufacturing method of talcum powder, including raw material selection, crushing, grading, surface treatment and other links.

2. raw material selection

manufacturing talcum powder raw material is mainly talc ore, should choose good quality, stable composition, ore structure closely as raw materials. In the process of raw material selection, it is necessary to strictly control the content of radioactive, heavy metals and other harmful substances in the ore to ensure product quality.

3. pulverization

pulverization is the key link in the manufacture of talcum powder, through which talc ore can be turned into fine powder. The crushing equipment can be selected from Raymong mill, air flow mill, ball mill, etc. The specific choice of equipment needs to be determined according to the fineness and output of the product. In the crushing process, it is necessary to control the speed of the crusher, feed speed and other parameters to ensure that the particle size distribution and fineness of the product meet the requirements.

4. classification

classification is a process of particle size separation of crushed talc powder to obtain products of different particle sizes. Commonly used classification equipment is air classifier, mechanical classifier and so on. In the classification process, it is necessary to adjust the parameters of the classifier according to the particle size requirements of the product to ensure that the particle size distribution of the product meets the requirements.

5. Surface Treatment

In order to improve the dispersibility, flowability and other properties of talc, it is necessary to treat the surface of talc. Commonly used surface treatment methods include coating treatment, modification treatment, etc. Coating treatment can be coated with a layer of organic matter on the surface of talc to improve its compatibility with organic matter; modification treatment can change the polarity of the surface of talc to improve its compatibility with polar substances.

6. packaging and storage

produced talcum powder needs to be packaged and stored. The packaging process needs to select appropriate packaging materials and methods according to the characteristics of the product to ensure that the product will not be contaminated and damaged during transportation and use. The storage process needs to pay attention to moisture, sun protection, fire prevention and other measures to ensure product quality.

7. Quality Control

In the process of manufacturing talcum powder, it is necessary to strictly control the quality of each link to ensure that the quality of the final product meets the requirements. It is necessary to establish a perfect quality management system to comprehensively monitor the selection of raw materials, crushing, grading, surface treatment, packaging and storage, and find and solve problems in time.

8. environmental protection and sustainable development

in the process of manufacturing talcum powder, we need to pay attention to environmental protection and sustainable development. Effective measures should be taken to reduce the emission of dust, noise and other pollutants, reduce energy consumption and improve resource utilization. At the same time, we should actively promote green production technology and equipment, and improve the environmental awareness and social responsibility of enterprises.

9. Conclusion

In short, the manufacturing method of talc powder includes raw material selection, crushing, grading, surface treatment and other links. It is necessary to strictly control the quality of each link to ensure that the quality of the final product meets the requirements. At the same time, we should pay attention to environmental protection and sustainable development, promote green production technology and equipment, and improve the environmental awareness and social responsibility of enterprises.
  • 化易天下咨询

    Quick Response

    Customer service is available 24/7 for extremely fast response

  • 化易天下销售

    Exclusive Services

    Dedicated consultant 1 to 1 service

  • 化工品交易市场

    Massive Resources

    Connecting resources upstream and downstream

  • B2B化工交易

    Technology Advanced

    Technology Information Service

  • 化工贸易金融服务

    Transaction Security

    Merchant authentication and risk control model

  • 化工仓储服务平台

    One-stop service

    Trading logistics warehouse-style services