Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Production and manufacturing methods and processes of lubricants

[Chemical Knowledge]：Production and manufacturing methods and processes of lubricants

Read： 630 Time：13months ago Source：Transform the World with Simplicity

Lubricant manufacturing method

1. Introduction

Lubricants play a vital role in the operation of various mechanical equipment, especially in the field of chemical production raw materials, the performance of lubricants directly affects the operating efficiency and service life of the equipment. This article will detail the manufacturing methods of lubricants in order to improve the performance of lubricants and reduce production costs.

2. Materials and Methods

1. Material

base oil: This is the main component of lubricants, usually paraffin-based base oil or naphthenic base oil.
additives: including antioxidants, anti-wear agents, extreme pressure agents, corrosion inhibitors, metal passivators, etc.

2. Manufacturing method

mixing: the selected base oil and additives are added into the mixing equipment according to a certain proportion, and are fully stirred and mixed.
Homogenization: The mixture is homogenized by a homogenizer to ensure uniform distribution of the ingredients.
degassing: Under vacuum conditions, the mixture is freed of gas.
Filtration: Impurities in the mixture are removed by filtration equipment.
Filling: Filtered lubricant is filled into pre-cleaned containers.

3. Results and Discussion The

the lubricant manufactured by the above method has good lubricating properties, anti-oxidation properties, anti-wear properties and anti-corrosion properties. Specific performance indicators are as follows:

viscosity: in line with relevant standards, with good fluidity.
flash point: higher than a certain temperature, with high safety.
acid value: lower, indicating a lower degree of oxidation, oxidation resistance is better.
four ball test: wear less, better anti-wear performance.
Anti-corrosion performance: in line with relevant standards, with good anti-corrosion performance.

Compared with similar products on the market, the lubricant manufactured in this paper has a higher cost performance and can meet the needs of chemical production raw materials. At the same time, the process for manufacturing the lubricant is simple, easy to operate, and easy to realize industrial production.

4. Conclusion

This paper introduces a lubricant manufacturing method in detail. The lubricant manufactured by this method has good performance and high cost performance, which can meet the needs of chemical production raw materials. At the same time, the method is simple, easy to operate, easy to realize industrial production, and has good application prospects.

Previous： The manufacturing method and process of the stabilizer.

Next： The production and manufacturing methods and processes of flame retardants.

News Categories