Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Production and manufacturing method and process of calcium chloride dihydrate ball

[Chemical Knowledge]：Production and manufacturing method and process of calcium chloride dihydrate ball

Read： 553 Time：20months ago Source：Transform the World with Simplicity

The manufacturing method
of calcium chloride dihydrate ball is
in the field of chemical production raw materials, calcium chloride dihydrate ball is a common product, has a wide range of uses. This article will introduce the manufacturing method of calcium chloride dihydrate balls, including raw material preparation, mixing, molding, drying and packaging steps.

1. Raw Material Preparation

The main raw materials for the manufacture of calcium chloride dihydrate balls are calcium chloride and water. Calcium chloride shall be a white powder or granular material free of impurities and shall have a purity higher than 95%. Water should be pure water, no impurities and odor.

2. Mixing

Mix calcium chloride and water together in a certain proportion and stir evenly. The mixing ratio can be adjusted according to product requirements, usually the mass ratio of calcium chloride to water is 1:2. During the mixing process, a stirring paddle or mixer can be used for stirring to ensure that the raw materials are fully mixed.

3. molding

put the mixed material into the molding machine for molding. The molding machine can adjust the size and shape of the ball according to product requirements, and is generally made into a spherical shape with a diameter of 1-3cm. During the molding process, attention should be paid to maintaining the consistency and uniformity of the material to ensure product quality.

4. Drying

The shaped calcium chloride dihydrate balls need to be dried to remove excess water. The drying temperature should be controlled at 60-80°C, and the drying time depends on the size and humidity of the ball, which generally takes 2-4 hours. During the drying process, attention should be paid to turning the spheres to avoid adhesion of the spheres.

5. packaging
The calcium chloride dihydrate balls after
drying need to be packaged to avoid moisture and contamination of the product. Packaging materials should be moisture-proof, corrosion-resistant materials, such as plastic bags or paper bags. Care needs to be taken to maintain the integrity and cleanliness of the product during the packaging process.

In short, the manufacturing method of calcium chloride dihydrate balls needs to pay attention to the operation details of the steps of raw material preparation, mixing, molding, drying and packaging to ensure product quality and production efficiency. At the same time, the production process needs to strictly comply with relevant safety regulations and environmental protection requirements to ensure the safety and sustainability of the production process.

The above is a general introduction to the manufacturing method of calcium chloride dihydrate balls. The specific production process needs to be adjusted and optimized according to the actual situation. It is hoped that this paper can provide some reference and help to the staff in related fields.

Previous： Manufacturing method and process of 74% calcium chloride powder

Next： Production and manufacturing method and process flow of sodium fluoride

News Categories