Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Ytterbium oxide manufacturing method and process flow

[Chemical Knowledge]：Ytterbium oxide manufacturing method and process flow

Read： 925 Time：20months ago Source：Transform the World with Simplicity

The manufacturing method
of ytterbium oxide
1. Introduction

Ytterbium oxide is an important chemical production raw material, widely used in laser materials, fluorescent powder, magnetic materials and other fields. With the continuous development of science and technology, the manufacturing method of ytterbium oxide is also constantly improved and optimized. This article will introduce a common ytterbium oxide manufacturing method.

2. materials and equipment

1. Materials: ytterbium metal, sodium hydroxide, deionized water, etc.
2. Equipment: high temperature furnace, electronic balance, beaker, stirrer, filter, etc.

3. Manufacturing Steps

1. Weighing: Weigh ytterbium metal and sodium hydroxide in a certain ratio.
2. Dissolution: Sodium hydroxide was added to deionized water and stirred to dissolve.
3. Adding ytterbium metal: The weighed ytterbium metal is slowly added to the sodium hydroxide solution while stirring.
4. Reaction: The mixture is heated to a certain temperature in a high-temperature furnace for a certain period of time to make ytterbium metal fully react with sodium hydroxide.
5. Cooling: After completion of the reaction, the reaction mixture was naturally cooled to room temperature.
6. Filtration: The ytterbium oxide solid formed by the reaction was separated from the solution using a filter.
7. Washing: The ytterbium oxide solid was washed several times with deionized water to remove surface impurities.
8. Drying: The washed ytterbium oxide solid was dried in a high temperature oven.
Precautions for
4.

1. Pay attention to safety during operation to avoid high temperature burns and chemical splashes.
2. Strictly control the reaction temperature and time to ensure that the reaction is complete.
3. Maintain the purity of the ytterbium oxide solid during washing and drying.

5. summary The manufacturing method of

ytterbium oxide involves multiple steps and precautions, and requires operators to have certain chemical knowledge and experimental skills. Ytterbium oxide with high purity and stable properties can be prepared by the manufacturing method described in this paper, which provides strong support for research and production in related fields.

Previous： Manufacturing method and process of ammonium bicarbonate

Next： The production and manufacturing methods and processes of insurance powder.

News Categories