Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > PMA production and manufacturing methods and processes.

[Chemical Knowledge]：PMA production and manufacturing methods and processes.

Read： 762 Time：12months ago Source：Transform the World with Simplicity

PMA (propylene glycol monomethyl ether acetate) is a common chemical raw material, widely used in coatings, inks, cleaning agents and other fields. The following is about the manufacturing method of PMA:

1. raw materials to prepare

1. propylene glycol: propylene glycol is one of the main raw materials of PMA, generally using industrial grade propylene glycol, high purity requirements.
2. Acetic acid: Acetic acid is another main raw material, and industrial grade acetic acid is also used, which generally requires a purity of more than 99%.
3. catalyst: commonly used catalysts are sulfuric acid, hydrochloric acid and other acid catalysts.

2. reaction process

propylene glycol and acetic acid are added into the reactor according to a certain molar ratio, a catalyst is added, and the esterification reaction is carried out at a certain temperature and pressure. During the reaction, the reaction temperature and pressure need to be controlled, and the acid value and ester value of the reaction solution are monitored to determine the reaction progress.

3. post-treatment
After the
reaction is completed, the reaction solution is post-treated, including neutralization, dehydration, distillation and other steps, to obtain PMA products with higher purity.
Precautions for
4.

1. In the manufacturing process, it is necessary to strictly control the quality and proportion of raw materials to ensure product quality and yield.
2. The control of reaction temperature and pressure is also critical. Excessive temperature and pressure may cause equipment damage and product quality degradation.
3. In the post-processing process, it is necessary to pay attention to the purity and yield of the product, and minimize the generation of waste.

In short, the manufacturing method of PMA requires strict control of the process parameters of each step to ensure the quality and yield of the product. At the same time, it is also necessary to pay attention to the safety and environmental protection of the production process to avoid harm to the environment and personnel.

Previous： The production and manufacturing method and process of methyl methacrylate.

Next： MDI production and manufacturing methods and processes.

News Categories