Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Production and manufacturing method and process flow of dipentene

[Chemical Knowledge]：Production and manufacturing method and process flow of dipentene

Read： 812 Time：12months ago Source：Transform the World with Simplicity

Manufacturing Methods
of Dipentene
Dipentene is an important raw material for chemical production, which is widely used in spices, pharmaceuticals, pesticides and other fields. This article will introduce the manufacturing method of dipentene, including raw material preparation, reaction process, post-treatment and so on.

1. Raw Material Preparation
The manufacture of
dipentene requires the preparation of the following raw materials: glutaraldehyde, ethylene, catalyst. The ratio of glutaraldehyde to ethylene is 1:1.5-2, and the amount of catalyst is 0.5-1% of the mass of glutaraldehyde.

2. reaction process

1. glutaraldehyde and catalyst into the reaction kettle, stirring evenly.
2. Ethylene gas is introduced, the reaction temperature is controlled at 80-120 ℃, and the reaction pressure is controlled at 0.5-1.5MPa.
3. During the reaction, it is necessary to constantly monitor the formation of dipentene and adjust the reaction temperature and pressure as needed.
4. After completion of the reaction, the reaction solution was cooled to room temperature, and crude dipentene was isolated.

3. post-treatment

1. crude dipentene contains impurities and needs to be refined. Commonly used refining methods are distillation, extraction, crystallization, etc.
2. The refined dipentene needs to be tested for quality to ensure that its purity meets the requirements.
Precautions for
4.

1. During the manufacturing process, it is necessary to strictly control the reaction temperature and pressure to ensure that the reaction proceeds smoothly.
2. The selection and amount of catalyst have a great influence on the yield and purity of dipentene, and it needs to be selected according to the actual situation.
3. In the post-treatment process, it is necessary to select a suitable purification method according to the nature and impurities of dipentene.

In short, the manufacture of dipentene requires strict control of the conditions and parameters of each link to ensure product quality and yield. At the same time, it is necessary to pay attention to safety and environmental protection issues and comply with relevant laws, regulations and standards.

Previous： Production and manufacturing method and process flow of isooctane

Next： Manufacturing method and process of liquid paraffin

News Categories