Current Location： Home > News > Chemical Knowledge > Manufacturing method and process flow of silicone-acrylic emulsion

[Chemical Knowledge]：Manufacturing method and process flow of silicone-acrylic emulsion

Read： 354 Time：12months ago Source：Transform the World with Simplicity

The manufacturing method
of silicone acrylic emulsion
1. Introduction

silicone acrylic emulsion is an important raw material widely used in the field of chemical production, with excellent water resistance, weather resistance, chemical resistance and mechanical properties. In order to meet the needs of different fields for the performance of silicone-acrylic emulsion, this paper proposes a manufacturing method to improve the stability and performance of silicone-acrylic emulsion.

2. materials and equipment

1. Materials: acrylic monomers, siloxane monomers, initiators, emulsifiers, water, etc.
2. Equipment: stirring kettle, emulsifying machine, thermometer, pH meter, etc.

3. Manufacturing Methods

1. Pre-emulsification: Add acrylic monomer, siloxane monomer, emulsifier and a part of water into a pre-emulsifying kettle, and stir evenly to form a pre-emulsion.
2. Polymerization: The pre-emulsion is pumped into a polymerization kettle, an initiator is added, the temperature is raised to a set temperature, and the polymerization reaction is carried out. During the reaction, the temperature and pH value were controlled to ensure the smooth progress of the reaction.
3. Post-treatment: After the reaction is completed, the mixture is cooled to room temperature, the remaining water is added, the pH value is adjusted to neutral, and impurities are removed by filtration to obtain a finished silicone-acrylic emulsion.

4. precautions

1. Strictly control the ratio of monomer and initiator to ensure the complete polymerization reaction.
2. In the process of polymerization, it is necessary to pay close attention to the changes of temperature and pH value, and adjust the process parameters in time.
3. In the post-treatment process, the stability of the emulsion should be ensured to avoid the occurrence of demulsification.

5. performance testing

1. stability: silicone acrylic emulsion placed in a constant temperature box, observe whether the emergence of stratification, demulsification and other phenomena.
2. Solid content: Determination of solid content in silicone acrylic emulsion by drying method.
3. Viscosity: The viscosity of the silicone-acrylic emulsion was measured using a viscometer.
4. pH: Use a pH meter to measure the pH of the silicone-acrylic emulsion.

6. results and discussion

Through the above manufacturing method, we have successfully prepared a silicone-acrylic emulsion with good stability and excellent performance. The experimental results show that the emulsion has good water resistance, weather resistance, chemical resistance and mechanical properties, which can meet the needs of chemical raw materials in different fields.

In the discussion part, we can compare the performance of silicone-acrylic emulsion under different preparation conditions and analyze the influence of various factors on the performance of the emulsion. For example, the effects of monomer ratio, initiator type and amount, reaction temperature and time on emulsion stability, solid content, viscosity and pH value can be investigated. In addition, we can also evaluate the performance of silicone-acrylic emulsion in different application fields, and provide reference for actual production.

7. conclusion

This paper presents a silicone acrylic emulsion manufacturing method, through experimental verification, the method of preparation of silicone acrylic emulsion has good stability, excellent performance and other characteristics, can meet the needs of different fields of chemical production of raw materials. At the same time, this paper also introduces the matters needing attention and performance testing methods in the preparation process, which provides guidance for actual production.

Previous： Manufacturing method and process of elastic emulsion

Next： Manufacturing method and process flow of modified acrylic emulsion

News Categories