Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Manufacturing method and process of sole stock solution

[Chemical Knowledge]：Manufacturing method and process of sole stock solution

Read： 973 Time：17months ago Source：Transform the World with Simplicity

The manufacturing method
of sole stock solution
1. Introduction

With the continuous development of science and technology, people's requirements for shoes are getting higher and higher. As an important part of shoes, soles need to have wear resistance, folding resistance, anti-aging and other properties. Therefore, the manufacture of high quality sole solution has become an important task in the field of chemical production. The purpose of this paper is to introduce a manufacturing method of sole stock solution and provide reference for chemical production.

2. Materials and Methods

1. Material

The materials required for this manufacturing method mainly include rubber, filler, vulcanizing agent, accelerator, etc. Among them, rubber is the main component of the sole solution, the filler can improve the hardness and wear resistance of the sole, and the vulcanizing agent and accelerator are used to control the vulcanization process of the rubber.

2. Equipment

sole stock solution needs to use internal mixer, open mill, extruder and other equipment. Among them, the mixer is used to mix rubber and filler evenly, the mill is used to add additives such as vulcanizing agent and accelerator, and the extruder is used to extrude the mixture into a certain shape of the sole solution.

3. manufacturing method

(1) ingredients: according to a certain proportion of rubber, filler and other raw materials into the mixer, mixed.

(2) Mixing: In the mixer, through the action of high temperature and high pressure, the rubber and filler are fully mixed, and the rubber is plasticized to a certain extent.

(3) Open refining: Add the mixture after mixing into an open mill, add additives such as vulcanizing agent and accelerator, and further mix evenly.

(4) Extrusion: The mixture after the opening is fed into the extruder, and the mixture is extruded into a certain shape of the sole stock solution by the screw and barrel of the extruder.

(5) Cooling: The extruded sole stock solution is cooled to solidify into a solid state.

3. Results and Discussion

By the present manufacturing method, a shoe sole dope having excellent properties can be manufactured. Specifically, the method has the following advantages:

1. The manufacturing process has strong controllability, and the ratio of each raw material and the processing process parameters can be adjusted according to the needs, so as to produce different performance of the sole solution.

2. the combination of mixing and opening process is used to make the rubber and filler fully mixed and improve the uniformity and consistency of the sole stock solution.

3. Using an extruder for molding, you can produce different shapes, precise size sole solution, improve production efficiency and product quality.

4. Conclusion

This paper introduces a method of manufacturing sole stock solution, which has the advantages of strong controllability, high production efficiency and good product quality. By adjusting the ratio of each raw material and the processing parameters, the sole stock solution with different properties can be produced to meet the needs of different occasions.

Previous： The production and manufacturing method and process of slurry.

Next： Production and manufacturing method and process flow of tetrahydrofuran

News Categories