Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Production and manufacturing method and process flow of C4 after ether

[Chemical Knowledge]：Production and manufacturing method and process flow of C4 after ether

Read： 772 Time：14months ago Source：Transform the World with Simplicity

1. of manufacturing method
after ether C4 Introduction

After ether C4 is an important chemical production raw material, widely used in fine chemicals, pharmaceuticals, pesticides and other fields. With the increasing market demand, the manufacturing method of C4 after ether has become a hot topic. This article will introduce a manufacturing method of C4 after ether, which aims to improve production efficiency, reduce costs, and create greater economic benefits for enterprises.

2. Materials and Methods

1. Material

The raw materials required for this experiment are C4 after ether, catalyst, cocatalyst, etc.

2. Equipment

The equipment required for this experiment includes reactor, fractionator, condenser, pump, etc.

3. Manufacturing method

(1) The ether post-C4 and the catalyst are added into the reactor according to a certain ratio, and the reaction is carried out at a certain temperature and pressure.

(2) After the reaction is completed, the reaction product is separated to obtain crude ether C4. The crude post-ether C4 is purified

(3) to obtain a post-ether C4 product with high purity.

4. Analytical Methods

The composition of C4 products after ether was analyzed by gas chromatography.

3. Results and Discussion

1. Results

Through the method of this experiment, the higher purity of the ether C4 product can be obtained, the yield is higher, the product quality is stable.

2. Discussion

(1) The choice of catalyst has an important influence on the manufacture of C4 after ether, and it is necessary to choose a catalyst with high activity and good selectivity.

(2) reaction temperature and pressure are also important factors affecting the production of C4 after ether, and need to be optimized according to actual conditions.

(3) In the process of separation and purification, the operating conditions need to be controlled to ensure the purity and yield of the product.

4. conclusion

This experiment introduces a manufacturing method of C4 after ether, which can improve production efficiency, reduce costs and create greater economic benefits for enterprises. At the same time, it also provides new ideas and methods for the manufacture of C4 after ether, and promotes the development of raw materials for chemical production.

Previous： Manufacturing method and process of mixed C4

Next： Production and manufacturing method and process flow of national standard solvent oil

News Categories