Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Manufacturing method and process of rubber oil

[Chemical Knowledge]：Manufacturing method and process of rubber oil

Read： 985 Time：12months ago Source：Transform the World with Simplicity

The manufacturing method
of rubber oil
1. Introduction

Rubber oil is an important raw material in the production of chemical products and is widely used in the processing of rubber products. In order to improve the performance and quality of rubber products, it is very important to manufacture high quality rubber oil. This paper will introduce the manufacturing method of rubber oil in detail, including formula design, production process, quality control and so on.

2. Formulation Design

1. Base oil selection: Select the high quality base oil with low viscosity, good oxidation stability and thermal stability.
2. Additive selection: According to the performance requirements of rubber oil, select appropriate additives, such as antioxidants, anti-wear agents, anti-foaming agents, etc.

3. production process

1. ingredients: according to the formula requirements, the base oil and additives in proportion to the ingredients tank, mixing.
2. Dehydration: Vacuum dehydration of the mixture in the batching tank to remove moisture and other volatile substances.
3. Filtration: Through the precision filter, the impurities and particles in the mixture are removed to ensure the cleanliness of the rubber oil.
4. blending: the filtered mixture is sent to the blending kettle for high temperature blending treatment to make the components fully react and generate stable rubber oil.
5. Cooling: The blended rubber oil is cooled to reach normal temperature.
6. Filling: Fill the cooled rubber oil into the designated packaging container to complete the production process.

4. quality control

1. testing items: rubber oil for a number of performance testing, such as viscosity, flash point, acid value, pour point and so on.
2. Testing frequency: After the production of each batch of rubber oil is completed, quality testing is carried out to ensure that the product is qualified.
3. Disposal of nonconforming products: For unqualified products, re-inspection or scrapping shall be carried out to prevent unqualified products from entering the market.

5. precautions

1. Keep the equipment clean during the production process to avoid impurities contaminating the product.
2. Strictly control the parameters of each production process to ensure stable product quality.
3. Strengthen the safety management of the production site and abide by relevant safety operation procedures.

6. conclusion

rubber oil manufacturing method involves formulation design, production process, quality control and other aspects. In order to ensure the quality and performance of rubber oil, it is necessary to select the high quality base oil and appropriate additives, and strictly control the parameters and quality inspection standards of each production process. At the same time, strengthen the safety management of the production site and abide by the relevant operating procedures to ensure the smooth progress of the production process.

Previous： Production and manufacturing method and process of white oil

Next： Production and manufacturing method and process flow of dicyclopentadiene

News Categories